• News
  • Resources
  • SHOP
  • EN
    • ES
  • Shopping Cart Shopping Cart
    0Shopping Cart
Premium PSU
  • About us
    • We are Premium
    • Quality
    • Careers
  • Products
    • Standard
      • DC/DC Converters
      • DC/AC Inverters
      • AC/DC Battery chargers
      • AC/AC Variable Frequency Drive
      • AC/DC Rectifiers
      • Product Selector
      • EV Chargers
      • IoT Cloud Solutions
      • AC/DC DIN Rail Power Supplies and Accessories
    • SMART TOOLS POWERED BY AI
      • SMART SELECTOR
    • Custom solutions
      • Design your solution
  • Industries
    • High Tech Industry
    • Energy
    • Defense
    • Rail & Transportation
    • Electric Mobility
    • Data Centers
  • Services
  • Case Studies
  • Contact
  • Click to open the search input field Click to open the search input field Search
  • Menu Menu
Home1 / Application Notes

Our application guides and design examples will help you understand and get the most out of our power solutions. You will find written materials detailing specific technologies and how to solve problems using products.

fonones y electrones
Application Notes

Phonon Engineering and Advanced Thermal Management in Power Electronics

Engineering Insight · Thermal Management

Phonon Engineering and Advanced Thermal Management in Power Electronics

From phonon-scattering physics to next-generation TIMs, substrate ceramics and active thermal control in SiC/GaN converters

ZT > 1.5
Skutterudite at 800 K
2–5×
Life via active ΔTj control
10–30%
ΔTj reduction, active TM
50 kW
Waste heat at 1 MW / 95%

Executive summary

Thermal management, together with reliability, is the factor that limits power density and useful life of power-electronics converters. The transition to wide-bandgap semiconductors (SiC and GaN) does not solve this problem — it shifts it: more efficient devices generate less heat, but over smaller die areas they produce more concentrated heat fluxes. The bottleneck, once again, is how to evacuate that heat without penalising reliability or introducing thermo-mechanical failure mechanisms.

Contemporary solid-state physics offers a set of conceptual tools — phonon-scattering engineering, Phonon-Glass Electron-Crystal (PGEC) materials, nanostructured superlattices — that have traditionally been developed to improve the thermoelectric figure of merit ZT. The underlying principles, however, are the same ones that govern the design of any advanced cooling system and any waste-heat recovery strategy. This article synthesises the academic state of the art and translates it into the decisions that a designer of industrial and railway inverters will be making in the coming years.

1. The thermal problem of power electronics

The junction temperature Tj of a power semiconductor simultaneously dominates electrical performance, useful life and reliability. The rule every power electronics engineer knows is brutal: for every 10 °C increase in Tj, the life of the power module drops to roughly half by the Arrhenius law; and for every 30 % increase in the thermal cycle amplitude ΔTj, the wire bonds of the module lose a factor of 3 to 5 in cycles to failure according to the Coffin-Manson model.

The most efficient reliability lever is not selecting better components, but reducing both Tj and ΔTj. And that reduction depends on the quality of the entire thermal chain — junction to case, case to heatsink, heatsink to ambient. Each of those links is a thermal resistance Rth in series, and improving it requires understanding what carries heat and what scatters it. Better cooling is not a fluid-mechanics problem solvable with bigger fans; it is, ultimately, a problem of how phonons propagate, scatter and dissipate.

2. Heat carriers — phonons and electrons

In any solid, heat is transported by two parallel mechanisms: the diffuse flow of free electrons (relevant in metals and degenerate semiconductors) and the propagation of crystal-lattice vibrations, quantised as phonons (dominant in insulators and non-degenerate semiconductors). Total thermal conductivity decomposes as κ = κe + κL.

2.1 The kinetic approximation and its limits

The classical phenomenological estimate is κ = (1/3)·C·v·l, where C is specific heat capacity, v the mean carrier velocity and l the mean free path between collisions. A rigorous analysis starts from the Boltzmann transport equation in the relaxation-time approximation. Electronic thermal conductivity is κe = (1/T)·[K₂ − K₁²/K₀], where the generalised transport integrals Kn capture the interplay between electrical conductivity σ, Seebeck coefficient α and κe. Thermoelectric design is, in essence, a vector optimisation problem.

2.2 Failure of the Wiedemann-Franz law

The Wiedemann-Franz law states κe/σT = L₀ = constant. It holds when electrons scatter through elastic (horizontal) processes. At intermediate temperatures, vertical inelastic processes appear: electrons relax through collisions with low-energy phonons that change carrier energy without significantly altering wave vector k. The net effect is that κe drops more aggressively than σ, and the actual Lorenz number falls below L₀.

For an inverter designer, this subtlety is tangible: simple kinetic thermal models overestimate the heat-transport capability of electrons at intermediate temperatures. In copper or aluminium DC bus bars operating in the 80–150 °C range typical of a railway inverter, vertical processes affect the real thermal balance — not an academic correction.

3. Lattice thermal conductivity and phonon scattering

In semiconductors and ceramics — the materials that make up the thermal path of a power module, from the SiC chip to the AlN substrate via the SAC305 solder — thermal conductivity is dominated by κL.

3.1 The Callaway model and Umklapp processes

The Callaway model integrates two types of phonon-phonon process. Normal (N) processes conserve crystal momentum and produce no direct thermal resistance; Umklapp (U) processes involve total momentum “wrapping around” outside the first Brillouin zone and are the primary source of intrinsic thermal resistance at temperatures comparable to or above θD.

Slack derived the U-process relaxation rate as τU⁻¹ ≈ (ℏγ²/Mv²θD)·ω²·T·exp(−θD/3T), where γ is the Grüneisen parameter — quantifying crystal anharmonicity — and M is the mean atomic mass. Design consequence: materials with high γ show high κL degradation with temperature; materials with high M scatter phonons at lower frequencies. This is why Bi₂Te₃ (high M) outperforms Si (high κ) as a thermoelectric despite similar crystal structures.

4. Phonon-Glass Electron-Crystal (PGEC) materials

The PGEC paradigm, formulated by G. A. Slack in the early 1990s, summarises the goal of modern thermoelectric engineering: an ideal material should transport electrons like a perfect crystal (high mobility, high σ) and transport heat like an amorphous glass (low κL). Forcing coexistence requires structures where unit-cell complexity acts as a selective phonon filter.

4.1 Skutterudites — the rattler mechanism

Skutterudites (general formula MX₃, M = Co, Rh, Ir; X = pnictogen) contain large icosahedral cages that host guest atoms. When a high-mass electropositive atom is introduced (lanthanides such as La, Ce, Yb; alkaline earths such as Ba), the guest is weakly bound and vibrates with anomalously large amplitude at a characteristic Einstein temperature θE — it literally rattles within the cage. This resonant scattering strongly suppresses phonons near the rattling frequency, reducing κL by up to an order of magnitude without proportionally affecting σ.

State of the art: double-filled skutterudites (Yb + Ba) have reached ZT > 1.5 at 800 K, compared with ZT ≈ 0.3 for the unfilled binary skutterudite — a 5× improvement obtained by engineering the same crystal with guest-atom insertion alone.

4.2 Clathrates

Clathrates (Types I, II, III, defined by cage geometry) operate under a similar principle with a more rigid and structurally complex host lattice. The reduction of κL is exacerbated by intrinsic guest disorder and the multiplicity of scattering centres in the unit cell — typically an order of magnitude lower κL than the host material without guests.

5. Nanostructuring and superlattices

The second great lever for reducing κL without destroying σ is nanostructuring. The fundamental idea is to introduce artificial boundaries at a scale that limits the phonon mean free path (λph typically 100–300 nm at room temperature) without significantly affecting that of electrons (λdB ~10 nm in degenerate semiconductors). The result is selective scattering: phonons blocked, electrons passing.

5.1 Kapitza resistance and coherent transport

At any interface between two materials with different vibrational properties — for example, Si/SiGe in a superlattice — phonons encounter thermal boundary resistance (Kapitza resistance, RB). The physical origin is the disparity between the dispersion relations ω(q) of the two materials. In superlattices with periods of a few nanometres, a qualitatively new phenomenon appears: the superlattice creates a new folded Brillouin zone with mini-gaps that block certain frequency ranges — a phononic crystal by analogy with photonic crystals.

5.2 Nanowires and low dimensionality

Reducing geometric dimensionality limits the phonon mean free path through surface scattering, especially when surfaces are rough. An emblematic case: graphite in 3D bulk form shows κ up to 2,000 W/m·K in the basal planes, but individual nanowires can show κ reduced by orders of magnitude through rough-surface scattering.

6. Practical implications for the inverter designer

The design-level view of the thermal chain (thermal budget, Foster/Cauer modelling, cooling hierarchy) is covered in our article Thermal Design in Power Electronics. Here we focus on what the physics of phonon transport adds to those decisions.

6.1 Thermoelectric recovery of waste heat

A 1 MW traction inverter at 95 % efficiency dissipates 50 kW of heat — comparable to an industrial electric heater. Advanced thermoelectric materials with ZT > 2 would open the possibility of recovering a non-negligible fraction as usable electricity, powering the converter’s own auxiliaries or returning it to the DC bus. On the 2028–2035 horizon, this represents a credible path to raising system efficiency above the 99 % plateau.

6.2 Advanced thermal interface materials (TIM)

The TIM layer between the power module and the heatsink is the most critical link in the thermal chain. Thermal conductivities by technology:

TIM technology κ (W/m·K) Notes
Standard silicone grease 1–3 Outgassing risk in railway (optical, sensor environments)
Advanced ceramic pads 6–10 Current industrial standard
Phase-change metallised pads (PCM) >12 Premium PSU standard in railway programmes — no silicone migration
Dispersed graphene TIM ~30 Near-term commercial — qualification ongoing
Gallium-based liquid metals 50–80 Al compatibility challenges; high-power prototypes
Vertically aligned CNT >100 Research frontier — not yet at industrial maturity

Premium PSU already standardises PCM pads in railway programmes where silicone is problematic (cabins with optical sensors, instrumentation equipment).

6.3 Substrate ceramics — the battle for high κ

The DBC (Direct Bonded Copper) substrate determines how much of the heat generated in the junction reaches the heatsink. Options ordered by increasing κ:

Substrate κ (W/m·K) CTE (ppm/K) Positioning
Al₂O₃ (alumina) 24–26 7.0 Cost-optimised industrial applications
Si₃N₄ (silicon nitride) 70–90 3.2 Gaining share — superior mechanical strength, severe thermal cycling
AlN (aluminium nitride) 150–180 4.5 Dominant in railway traction, industrial SiC
Diamond DBC >1,000 1.5 Research / aerospace — cost barrier for industrial use

AlN is the dominant option in railway-traction modules and industrial SiC. Si₃N₄ is gaining share because it combines acceptable κ with superior mechanical strength — particularly important where DBC fatigue from thermal cycling is the dominant failure mechanism.

6.4 Active thermal management — the lever available today

While advanced materials mature, the lever with the best cost/benefit ratio available today is software-based active thermal management. Work by Andresen and Liserre (Microelectronics Reliability, 2014) demonstrates ΔTj amplitude reductions of 10–30 % through three control strategies:

Three control strategies for active thermal management

  • Adaptive switching-frequency modulation — fsw is reduced under transient conditions to lower switching losses and relieve the most stressed module.
  • Loss redistribution among parallel arms — the controller identifies the module with the highest Tj and shifts current towards less stressed ones.
  • Real-time Tj estimation — from Vce_sat and current, with compensation by directly measured case temperature.

ΔTj-per-cycle reductions of 10–30 % translate, via Coffin-Manson, into 2–5× life-extension factors. This requires no novel materials and no manufacturing-process changes: it is implemented entirely in controller firmware. At Premium PSU we incorporate it progressively into higher-power platforms where the MTBF return justifies the additional control complexity.

7. Synthesis and outlook

Phonon-scattering engineering has proved to be the most effective route to overcome the limits of thermoelectric efficiency and, by extension, to rethink the foundations of thermal management in power electronics. Integrating the models of Klemens, Slack, Callaway and Pohl, the design of next-generation materials and architectures pivots on three pillars:

Pillar Mechanism Horizon
Selective phonon scattering Rattler atoms (skutterudites), cage disorder (clathrates), nanostructured interfaces 2026–2030 — TIM and substrate integration
Phononic bandgap engineering Superlattice folded Brillouin zones, coherent phonon blocking 2030–2035 — module-level integration
Waste-heat recovery Advanced ZT > 2 thermoelectrics, on-board TEG for auxiliaries 2030–2035 — system level

For the power electronics designer, the practical translation is clear: the physics developed to improve ZT in thermoelectrics is exactly the physics that governs next-generation TIMs, advanced substrates and active thermal management strategies. Understanding phonon transport is not an academic luxury — it is the foundation of the next decade of power-density and reliability improvements in power electronics.

About Premium PSU

Premium PSU (Premium SA) designs and manufactures custom power supplies and power converters in Barcelona, with over 40 years of experience in railway, energy, industrial, data centre and defence applications.

Talk to our engineering team

Discuss your power conversion requirements with Premium PSU.

Contact us

convertidor
Application Notes

AC/AC frequency converters: the little-known solution to a problem everyone has

Application Note · AC/AC Converters

AC/AC frequency converters: the little-known solution to a problem everyone has

How fixed-frequency AC/AC converters solve the 50/60 Hz problem in export manufacturing, railway, marine and industry

Ask ten industrial engineers what a frequency converter is and nine will think of a variable frequency drive (VFD). They are not wrong: VFDs are ubiquitous in industry for controlling the speed of electric motors. But there is a category of frequency converter that goes unnoticed and solves a completely different problem: fixed-frequency AC/AC converters.

An AC/AC converter takes alternating current at one frequency and voltage and converts it into alternating current at another frequency and voltage. No moving parts, no mechanical wear, with efficiencies of 92–96%. And it solves problems that cost companies tens of thousands of euros every year.

The problem: a world divided between 50 Hz and 60 Hz

The world operates on two main grid frequencies. Europe, most of Asia, Africa and South America use 50 Hz. North America, part of South America, South Korea, Saudi Arabia and several other countries use 60 Hz. This division is not an academic detail: it is a real operational problem.

A three-phase induction motor designed for 50 Hz / 400 Vac will run 20% faster if connected directly to a 60 Hz grid. Torque curves change. Cooling capacity is reduced. In compressors, pumps and machine tools, this can mean anything from reduced performance to mechanical failure.

Applications where AC/AC is essential

Export manufacturing

A Spanish company builds industrial equipment for 50 Hz. It wins a contract in the United States, Saudi Arabia or Mexico. Instead of redesigning the machine (cost: EUR 15,000–75,000 per model), it installs a frequency converter between the local grid and the machine. The machine receives 50 Hz / 400 Vac as if it were in Spain.

Railway

Train HVAC compressors are designed for a specific frequency. When the train runs under different catenary systems or crosses borders, the available frequency may change. An AC/AC converter ensures that the compressor always operates at its design frequency. Premium supplies AC/AC converters that perform exactly this function on high-speed trains.

Marine

A ship built in Europe (50 Hz) docks at a port in the United States (60 Hz). Without frequency conversion, motors, galley equipment and air conditioning run out of specification or simply fail. An on-board AC/AC converter eliminates the problem.

Industry

Machinery imported from countries with a different frequency, test laboratories that need to simulate the conditions of another frequency, frequency-sensitive process equipment.

Why a VFD is not the solution

If a VFD can vary the frequency, it seems logical to use it as a fixed converter. But a VFD produces a PWM waveform, not a clean sine wave. For motors (inductive loads) this is acceptable, because the motor filters the waveform. For transformers, resistors, electronics and mixed loads, harmonic distortion causes problems: overheating, interference and erratic operation.

A dedicated AC/AC converter includes an output filter that produces a true sine wave with THD below 3%. It is compatible with any type of load: motors, transformers, resistive heaters, electronics and lighting.

From Barcelona, from 1 kW to 72 kW

We manufacture AC/AC frequency converters at our plant in Barcelona, with power ratings from 1 kW to 72 kW. Our platforms are EN 50155 certified for railway applications and designed for demanding industrial environments. From AC/AC converters in service on regional trains in northern Europe to those powering HVAC compressors on high-speed trains, we have real production experience in the most demanding applications.

If you have an application that requires frequency conversion, we can probably solve it with an existing platform configuration, without the cost or lead time of a fully custom design.

Do you have a frequency conversion problem in your project?

We manufacture AC/AC converters from 1 kW to 72 kW in Barcelona. Tell us about your application and we will advise you with no obligation.

Contact our engineering team

About Premium SA — Founded in Barcelona in 1981, Premium SA designs and manufactures custom power converters for railway, industrial, energy and defence applications, with over 40 years of experience.
Firmware
Application Notes

Verification, Validation and TDD in Critical Firmware

Engineering Insight · Software V&V

Verification, Validation and TDD for Critical Converter Firmware

Why the firmware of a power converter is a critical reliability component — and how Premium SA treats it as such

1981
Year Boehm formulated the V&V distinction
V-Model
EN 50128 methodological framework for railway firmware
MC/DC
Minimum coverage required at SSIL 4
143
MISRA C:2012 rules (16 mandatory)

Executive Summary

A modern power electronics converter is, today, as much software as hardware. The controller firmware executes regulation loops, protections, digital calibration, active thermal management, telemetry and, in an increasing number of cases, functional safety functions certified to railway SSIL or automotive ASIL. Any defect in that firmware is indistinguishable — from the end operator’s perspective — from a hardware defect: the equipment does not work, does not fulfil its mission, triggers contractual penalties. The difference is that firmware does not physically age, but it does degrade in terms of confidence if it is not subjected to a disciplined process of verification and validation.

This article reviews the fundamentals of software quality assurance applied to embedded power electronics firmware: Boehm’s critical distinction between verification and validation, the Test-Driven Development discipline, the V-Model of EN 50128, the MiL → SiL → PiL → HiL → SYSiL testing pyramid, black-box and white-box techniques, and the “terminological swamp” that persists in the industry. The thesis is direct: critical firmware is designed with the same discipline with which we design a power module — mission profile, derating, FMEA, V&V — because it shares the same customer and the same contractual commitments.

1. Firmware as a Critical Component — Why Discipline Matters

A typical Premium SA converter from fifteen years ago carried minimal firmware: an elementary state machine, a few PI loops implemented in fixed-point arithmetic, hardware protections reinforced with a couple of software checks. The complexity of the embedded code fitted in a few kilobytes and could be reviewed line by line by an expert in an afternoon. That era is over.

The modern converter — integrating digital calibration, active thermal management, predictive DC bus ripple control, CAN/Ethernet/Modbus communication with the operator’s supervisor, PHM telemetry with RUL estimation, OTA firmware update with cryptographic signature, and possibly active safety functions certified to railway SSIL — carries tens of thousands of lines of C code, organised in modular architectures with HAL, RTOS, priority tasks and communications libraries. The probability that such code is perfectly correct on its first writing is, simply, zero.

Firmware as a component with a manageable failure rate. From the RAMS reliability standpoint, firmware is a component like any other in the system. It has its own failure rate, dominated — unlike physical components — by systematic defects (programming or specification errors) rather than random defects. The good news is that those systematic defects can be attacked with methodology: a disciplined verification and validation process reduces them in a quantifiable way. The bad news is symmetric: without discipline, those defects remain latent in the code and emerge — always — at the most costly moment. A firmware failure detected in the fleet has exactly the same economic structure as a hardware failure: penalty, withdrawal, FRACAS, propagation of the correction to the installed population. For this reason, at Premium SA, firmware is treated with the same methodological seriousness as the power module: D2W → D2F → D4R → D4Co applied to software.

2. Verification and Validation — Boehm’s Distinction

The most clarifying distinction in software quality assurance was formulated by Barry Boehm in 1981 through two apparently similar but methodologically distinct questions:

Boehm’s two questions. Verification: “Are we building the product right?” Validation: “Are we building the right product?” The first question looks inward: does the code respect the technical specification? Does each development phase fulfil the conditions set at the start of that phase? The second looks outward: does the final system do what the customer actually needs in their operating environment? Both are necessary. Neither is sufficient on its own.

2.1 The practical differences

Dimension Verification Validation
Question Are we building the product right? Are we building the right product?
Orientation To the internal technical process To the customer and real use
Reference Technical specification User needs
Timing Continuous, phase by phase At the end of development or integration
Dominant techniques Static analysis, reviews, unit testing, MISRA, MC/DC System tests, acceptance tests, full HIL
Granularity “Small-scale” tests “Large-scale” tests
Who decides The technical team The customer / end user
Automatable Mostly yes Partially — the final word is human
Type of error detected Implementation errors vs. the spec Spec errors vs. the real world

2.2 Why both are necessary

Impeccable verification without validation produces technically correct code that satisfies a specification that was itself defective — the team meets its obligations and the customer receives a product that does not solve their problem. Vigorous validation without verification produces code that “works in demo” but hides structural defects that emerge under operating conditions not contemplated in the acceptance test. The two disciplines are complementary and attack different classes of error, and no serious software engineering strategy can do without either of them.

3. The Terminological Swamp — Error, Defect, Failure, Incident

Any serious discussion about software quality carries the historical vocabulary problem. Multiple key terms — verification, validation, test, error, defect, fault, failure — are overloaded with conflicting meanings in the literature. A team that uses these terms interchangeably commits, unwittingly, reasoning errors that translate into process errors. It is worth anchoring the vocabulary to the IEEE standard.

Term Precise definition Example in a power converter
Error Incorrect human action. Mistake in specification, design or coding An engineer assumes the current sensor is bipolar when it is unipolar
Defect / Fault / Bug Internal manifestation of the error. Incorrect state embedded in the code A branch of the OCP protection calculation that never executes because the condition is impossible
Failure Observable inability of the system to fulfil its function — the visible symptom The converter does not trigger OCP protection when current exceeds the threshold
Incident Anomalous event during execution that merits recording and analysis The operator reports an unexpected stop that does not match any known cause
Why the causal chain matters. A human commits an error → the error introduces a defect in the code → the defect may or may not manifest as a failure when executed. A defect can live in code for years without ever causing a failure, simply because the specific conditions that activate it have not yet arisen. This subtlety explains why exhaustive testing is impossible and why deliberate test case design matters. The strategy is not to test everything (impossible) but to test correctly: the conditions most likely to activate latent defects.

4. The V-Model — Verification at Every Level

The methodological framework that articulates verification throughout the software lifecycle is the V-Model. Its proposal is structural: to each level of specification corresponds a symmetric level of verification. The left branch descends from requirements to code; the right branch ascends from unit verification to final acceptance. The V-Model is the backbone of EN 50128 (railway), IEC 61508 (generic), ISO 26262 (automotive) and DO-178C (avionics).

4.1 The V correspondences

Specification level (left branch) Verification level (right branch) Question answered
System requirements (SyRS) Acceptance / system validation tests Does the system meet user needs?
Software requirements (SRS) System tests on firmware Does the firmware satisfy its functional specification?
Architecture design Integration tests between modules Do the modules collaborate as designed?
Module design Unit tests per module Does each module do what its contract says?
Source code Static analysis + inspection Is the code free of dangerous patterns?

4.2 SSIL — Software Safety Integrity Levels

EN 50128 defines five software integrity levels: Basic Integrity and SSIL 1 to SSIL 4. Each level imposes mandatory V&V techniques, scaled in rigour according to function criticality. Premium SA maps its applications to these levels according to the responsibility of each firmware block:

SSIL level Typical application in Premium SA converters Mandatory EN 50128 techniques
Basic Integrity Non-safety-related functions — telemetry, log, UI Code review, functional tests
SSIL 1-2 Cabin auxiliaries, standard OVP/OCP/OTP protections MISRA C static analysis, unit tests with I/O coverage
SSIL 3 Non-brake-critical traction converters, EV BMS MISRA + decision coverage + response time analysis
SSIL 4 Active safety functions (regenerative brake inhibition) MC/DC + formal models + diverse redundancy

5. Test-Driven Development — Tests as a Design Decision

Test-Driven Development (TDD) emerged in the early 2000s as one of the pillars of Extreme Programming and represents a radical inversion of the traditional workflow. In the classic order, the programmer writes functionality first and then — if there is time — adds tests to verify it. In TDD, the order is inverted: the test is written first, before the functionality exists.

5.1 The Red-Green-Refactor cycle

Phase Developer action Code state
Red Write a unit test for functionality that does not yet exist Test fails — confirms the test measures something real
Green Write the minimum code to make the test pass Test passes — the minimum behaviour is implemented
Refactor Restructure the code to eliminate duplication and improve design, without altering behaviour Tests still pass — behaviour is preserved

The cycle repeats in small increments — minutes, not hours. After a TDD session, the developer has produced both the production code and its test battery, and each line of the former is backed by at least one of the latter. The deepest methodological consequence is not having tests, but the inverted order: thinking the test before the implementation forces the developer to understand exactly what success or failure of the functionality means. That is, ultimately, an act of design.

5.2 TDD as a partial substitute for traditional design

TDD is more design than testing. Academic sources and industrial experience converge on a counterintuitive observation: TDD is not primarily a testing technique, it is a design technique. The effort of thinking the test before the code forces the developer to clarify the contract of each function: what inputs it accepts, what outputs it produces, what side effects it has, what error conditions it contemplates. Much of the work traditionally done in “analysis and design” is absorbed within the Red-Green-Refactor cycle. The documented benefits are consistent: better designed and cleaner code, greater scalability, lower defect rate, drastic reduction of regression time thanks to automated tests. The price is a significant learning curve: TDD requires higher-order thinking capacity to apply under pressure, and pedagogical studies suggest its mastery is only internalised with an 80 % practice / 20 % theory balance.

5.3 TDD, BDD and ATDD — the evolution towards behaviour

Pure TDD is effective but has a limit: it is purely technical. A team using only TDD can produce code that passes all unit tests and yet turns out to be inconsistent with the real needs of stakeholders. Two variants have emerged to close this gap. BDD (Behavior-Driven Development) extends TDD by focusing on the expected behaviour of the system, expressed in a ubiquitous language (Given-When-Then) that both developers and customers can understand — the specification is not translated into tests, the specification is the test. ATDD (Acceptance Test-Driven Development) combines requirement specification with automated acceptance tests written before the code. The three practices are complementary: TDD ensures each function is well designed technically; ATDD ensures the complete system fulfils its business purpose; BDD provides the linguistic bridge between the two.

6. Testing Fundamentals — What We Test and How

As Edsger Dijkstra famously noted, testing can be very effective at demonstrating the presence of errors, but is hopelessly inadequate for demonstrating their absence. This limitation is structural: the input domain of any non-trivial program is so large that exhaustively testing all combinations is, in practice, impossible. The discipline of testing therefore consists in selecting a finite, representative subset of the domain that effectively exercises the critical characteristics of the system.

6.1 The test case and the oracle

The basic unit of testing is the test case: a defined set of conditions, input data and an expected result under which the software is executed to determine in a measurable way whether it meets a requirement. Each test case presupposes, implicitly or explicitly, an oracle: the arbiter that decides whether the result obtained is correct. In simple systems, the oracle is the specification itself. In complex systems where no closed specification exists, the oracle is a human expert — the tester who decides whether the observed behaviour matches the expected behaviour.

6.2 Black-box, white-box, and the critical distinction

Aspect Black-box (functional testing) White-box (structural testing)
Knowledge of code None — only the specification is known Total — includes internal implementation
Case design From expected inputs/outputs From control flow paths
Coverage metrics Requirements / equivalence class coverage Statement, branch, MC/DC, path coverage
Detects Discrepancies vs. functional specification Structural defects, dead code, untested branches
Example in Premium SA firmware Converter regulates output voltage with < 2 % error under standard load profiles Each branch of the ADC interrupt handler executes at least once
Limitation Does not detect defects in unspecified code Does not detect missing requirements
The mindset shift that costs most. The foundational principle of modern testing — and the one hardest for a young team to internalise — is that the test is not a demonstration that the program works, but a deliberately destructive process designed to find its errors. A truly successful test cycle is one that manages to make the system fail and brings latent defects to light. A cycle where everything passes at the first attempt is not good: it is suspicious. This inversion of attitude changes even who does the testing. In critical projects, tests are designed — whenever possible — by someone different from the code author, because the author’s confirmation bias is one of the greatest enemies of good testing. At Premium SA, SSIL ≥ 2 tests are reviewed by a Validator independent from the Designer.

7. The MiL → SiL → PiL → HiL → SYSiL Pyramid

For embedded firmware — where code runs on a microcontroller coupled to a real physical system — testing discipline adds a layer of complexity that does not exist in classical application software. Tests cannot be limited to digital inputs and outputs; they must close the loop with the physical behaviour of the converter. The X-in-the-Loop methodology structures this challenge in five progressive levels:

Level What is tested Test platform
MiL — Model-in-the-Loop System model (Simulink, Stateflow) Pure simulation on PC; no C code yet
SiL — Software-in-the-Loop C code compiled for PC Execution on host; I/O are simulated
PiL — Processor-in-the-Loop Binary code in an emulator of the target processor Verifies object code correctness without physical hardware
HiL — Hardware-in-the-Loop Binary code on the real microcontroller Firmware runs on target HW; plant simulated in real time
SYSiL — System-in-the-Loop Complete physical embedded system Final validation on bench with real hardware and real plant

Each level resolves a class of defects before adding an additional layer of complexity. MiL captures modelling and control algorithm errors. SiL captures model-to-code translation errors. PiL captures target-compiler-specific errors, aggressive optimisations and finite arithmetic problems. HiL captures firmware-hardware integration defects: timing, interrupts, races, peripherals. SYSiL is the final validation with the real plant.

Why HIL is the most powerful tool in embedded firmware. HIL closes the firmware verification loop with operational power that is difficult to overstate. The real microcontroller executes the compiled and linked firmware exactly as it will enter production. Input signals (voltage, current, temperature sensors) are synthesised in real time from a simulator that emulates the behaviour of the DC bus, transformer, motor or load. The firmware does not know the signals are synthetic: for it, the system is real. This allows executing thousands of scenarios — including sensor failures, mains transients, short-circuits, overvoltages — without physical risk to the equipment or the test bench. A well-designed HIL programme discovers hardware/software integration defects that no unit test could capture: ADC sample losses in high-frequency interrupts, races between RTOS tasks, protection conditions that trigger incorrectly by a few microseconds. At Premium SA, no critical firmware reaches SYSiL without first passing an exhaustive HIL programme.

8. Premium SA’s D4Co-SW Process

Premium SA applies to firmware the same methodological framework as to hardware: the sequential gates D2W → D2F → D4R → D4Co, adapted to the specific techniques and artefacts of software.

Gate Meaning for firmware Exit criteria
D2W — Design to Work Firmware executes nominal functions SRS signed, modular architecture defined, MiL/SiL prototype running
D2F — Design to Function Firmware meets full functional specification Unit tests ≥ 90 % branch coverage, HIL integration passed
D4R — Design for Reliability Firmware maintains behaviour under adverse conditions Fault injection passed, timing analysis, RTOS stress testing
D4Co — Design for Compliance Firmware meets regulations and is maintainable for 30 years EN 50128 SSIL dossier, MISRA C clean, FRACAS active

8.1 Non-negotiable techniques — MISRA, MC/DC, HIL

  • MISRA C:2012 — static analysis with Polyspace, Coverity or PC-lint on all C code. The 16 mandatory rules and 111 required rules are exit conditions of the D2F gate.
  • MC/DC for SSIL ≥ 3 — every Boolean decision is tested with n+1 cases where each individual condition changes the result while the others remain fixed; for SSIL 4 it is complemented with formal analysis.
  • HIL as exit criterion — no firmware with responsibility over active safety closes the D4Co gate without a complete HIL programme covering the mission profile space.
  • Fault injection for SSIL ≥ 2 — sensor failures, analogue signal noise, communication loss and memory corruption are simulated. The system must always enter a safe state: PWM off, output high impedance, alarm active.

8.2 FRACAS applied to software

The FRACAS methodology — Failure Reporting, Analysis and Corrective Action System — that Premium SA applies to hardware extends to firmware. Any defect detected in the fleet is analysed at the appropriate level (function, module, shared library), the root cause is documented, and the correction is propagated: to all platforms sharing the code, via cryptographically signed OTA update, and to the development process, via a new review rule or new test case that prevents reintroduction of the defect. Fleet firmware improves over time, just as hardware improves through field returns.

9. Synthesis — Firmware as an Engineering Product

Critical firmware in a Premium SA converter is designed with the same discipline as a power module. The pillars are six and are chained:

Pillar Question answered Premium SA practice
Precise vocabulary Are we talking about the same problem? IEEE glossary — error / defect / failure / incident differentiated
V&V per Boehm Are we building the product right and are we building the right product? Continuous phase-by-phase verification + final validation with customer
V-Model + EN 50128 Is each level verified symmetrically? Mapping SRS ↔ SyRS, module ↔ unit test, architecture ↔ integration
TDD / BDD / ATDD Does the test precede the code? TDD on critical modules; ATDD for system requirements
Black-box + white-box Is the spec met and is all code exercised? Branch coverage for SSIL 1-2, MC/DC for SSIL 3-4
MiL → SiL → PiL → HiL → SYSiL Does the firmware work on real hardware with a real plant? Exhaustive HIL before SYSiL; nothing reaches the fleet without passing HIL
The technical closing. Modern firmware is as much a component as the power module. It fails by different mechanisms — systematic defects rather than physical degradation — but produces the same symptom from the operator’s perspective: the equipment does not fulfil its mission. Treating software with the same methodological discipline as hardware is not optional for the railway or critical infrastructure engineer: it is the condition of compliance with the 30-year RAMS commitment. At Premium SA, the D4Co-SW methodology articulates this discipline in gates with quantitative criteria. The result is firmware that enters the fleet with systematic defect rates several orders of magnitude lower than a “test and fix” process, and that improves over time thanks to a FRACAS that closes the loop between real operation and development. Software engineering for critical systems does not consist of avoiding all errors — that is impossible. It consists of building a process that detects them early, documents them with precision, and propagates corrections across the entire system before the next defects reach the customer.

About Premium PSU — With over 40 years of experience, Premium SA designs and manufactures custom power converters in Barcelona for railway, energy, industrial, data center and defence applications. Firmware development is integrated with hardware design from the conceptual phase of each project, following EN 50128, IEC 61508 and ISO 26262 practices.

Developing a converter with safety-related firmware? Talk to our engineering team.

Reliability and RAMS
Application Notes

Advances in Power Electronics: Reliability and RAMS

Engineering Insight · Reliability & RAMS

Advances in Power Electronics: Reliability and RAMS

From the potentiometer to digital and laser trimming, from the electrolytic capacitor to software-based ripple control — a roadmap to 40-year reliability in critical infrastructure and railway

Executive Summary

Industrial and railway power electronics is going through a quiet but decisive transition: the replacement of electromechanical components and manual trimming techniques with solid-state architectures and deterministic calibration processes. Three levers drive this transition — the progressive elimination of the potentiometer, the reduction or elimination of the electrolytic capacitor, and the introduction of laser trimming on thick-film technology as the precision adjustment method in production. Each one targets a specific failure mechanism that historically limited converter service life; combined, they explain why a well-engineered unit today can be committed to an MTBF an order of magnitude higher than its fifteen-year-old predecessor at the same power rating.

This article walks through the three levers, ties them together with the Design for Reliability (DFR) methodology applied at Premium SA — mission profile, derating, FMEA, HALT/HASS, burn-in, FRACAS — and connects the result with the RAMS requirements of railway (EN 50126 / EN 50128 / EN 50129) and of critical grid infrastructure. The thesis is simple: 40-year reliability cannot be bought, it has to be designed; and the technological advances described here are the tools that make such a design viable.

1. The Paradigm Shift: From Reliability as Outcome to Reliability as Design Decision

For decades, the reliability of a power converter was measured after the fact. A unit was designed against a functional specification, manufactured, delivered, and the field failure rate was observed in service. If the number was unacceptable, the design was reworked. This “test-and-fix” approach has a well-known structural cost: correcting a reliability problem scales roughly 1× at schematic stage, 10× at layout, 100× at qualification testing, and grows by several additional orders of magnitude when the issue surfaces in a deployed fleet. The economics simply do not work in sectors with 30-year vehicle or substation lifecycles.

Design for Reliability (DFR), originated at the Center of Reliable Power Electronics (CORPE, Aalborg University) and adopted as the internal standard at Premium SA, inverts this order: reliability is set as a quantitative target at project kickoff — mission profile, target MTBF, service life, environmental conditions, thermal cycling — and the entire development process is structured to meet that number. The associated paradigm shift is the migration from handbook statistical models (MIL-HDBK-217F) toward a Physics-of-Failure (PoF) approach, grounded in the actual physical failure mechanisms: thermal fatigue of solder joints and wire bonds (Coffin-Manson), electrolyte evaporation under Arrhenius, electromigration, corrosion, mechanical fatigue of fasteners.

The golden rule of reliability. A reliability defect detected at schematic stage costs 1 unit to fix. The same defect detected at layout costs 10. At qualification testing, 100. Once the product is in the field and emerges as a warranty return, the cost multiplies by the number of units already manufactured with the defect, plus the asset downtime in each of those cases. The corollary is direct: every euro invested in improving the design process has an economic leverage several orders of magnitude greater than its cost. The three technological levers described below — eliminating potentiometers, reducing electrolytics, trimming with lasers — are textbook examples of this equation: they add cost in BOM or in process, but they remove dominant failure modes.

2. Goodbye to the Potentiometer: Digital Adjustment and Laser Trimming

2.1 The potentiometer as a concentrator of failure modes

The mechanical potentiometer has been the standard component for production calibration and field maintenance adjustments in power converters for half a century. Its appeal is obvious: it allows fine tuning of an analogue value (a voltage reference, a protection trip point, a gain) without changing components or reprogramming anything. But that very flexibility hides a concentration of failure mechanisms unmatched by any other passive component on the converter: mechanical wear of the resistive track; sensitivity to vibration (EN 61373 Cat. 1B); sensitivity to humidity and contamination; single point of intermittent failure via the wiper contact; and human risk in the adjustment — any manual field intervention is an opportunity to introduce an untraced calibration error.

The question is not whether a potentiometer will fail, but when. In a unit with a 30-year service life and a railway or substation mission profile, the answer is invariably “before the end”.

2.2 Replacement strategy 1 — digital potentiometer and parametric calibration

The first replacement strategy moves the adjustment to the digital domain. The analogue reference no longer comes from a trim resistor divider but is generated by software from a parameter stored in the microcontroller’s non-volatile memory or in an external EEPROM. Calibration is performed once in production, on a calibrated and traceable test bench, and is recorded against the unit’s serial number, operator, date and process signature.

Characteristic Mechanical potentiometer Parametric digital calibration
Adjustment mechanism Wiper sliding on resistive track Read parameter from EEPROM/Flash
Temporal stability Cumulative wear, vibration, humidity Only DAC/MCU drift (ppm/°C)
Traceability None beyond manual procedure Digital log signed by serial number
Maintenance risk Misalignment by human intervention Protected calibration (digital signature)
Dominant failure mode Intermittent wiper opening MCU failure or EEPROM corruption
Typical function MTBF < 50,000 h in harsh environments > 500,000 h (silicon-limited)

2.3 Replacement strategy 2 — laser trimming on thick film

What laser trimming actually is. Laser trimming is a solid-state fine-adjustment process for resistors. A resistive paste is screen-printed onto a ceramic substrate (thick-film technology) and sintered at high temperature. The resulting resistor has an as-fired tolerance of around 20 %. A servo-controlled laser then performs a cut in the paste — typically an L-shape or double-cut pattern — removing a precise fraction of the conductive section until the measured resistance reaches the target value, within a tolerance of 0.1 % or better. The result is a passive, fully solid-state component: no moving parts, no contacts, no joints critical to humidity, calibrated to an absolute precision better than what any mechanical potentiometer can hold after a single vibration cycle. The process is reproducible, automatable, fully traceable, and locks the value permanently.

Thick-film technology has matured to make laser trimming a standard industrial process. Modern resistive pastes (RuO₂ and advanced ceramic compounds) provide stable resistors up to 300 °C continuous operation, with temperature coefficients below ±25 ppm/°C in precision grades. Components produced this way are surge-resistant, mechanically robust and their value does not drift over time under normal operating conditions.

2.4 When to choose each strategy

Function to be set Preferred strategy Reason
OVP/OCP/OTP trip points Digital calibration Mandatory traceability; RAMS audit
Control-loop gain Deterministic design (no trim) No post-design adjustment at all
Internal voltage reference Laser-trimmed precision resistor network Absolute stability without firmware involvement
Shunt current sensor Laser-trimmed integrated resistor 0.1 % tolerance with no temporal variation
Instrumentation amplifier gain Laser-trimmed R2R network, IC-integrated Current industry standard
Per-unit offset compensation One-shot digital calibration in production Covers natural silicon dispersion
Field-variable operating point Signed digital parameter Zero physical manual intervention

The practical conclusion is that in a modern Premium SA control board there should be no physical potentiometer at all. Factory adjustments are laser or digital; field adjustments are digital-only, protected by signature; control loops are deterministic by design.

3. Reducing and Eliminating the Electrolytic Capacitor

3.1 The electrolytic as the Achilles heel of the DC bus

If the potentiometer is the Achilles heel of calibration, the aluminium electrolytic capacitor is the Achilles heel of the DC bus. It is typically the component that fixes the service-life ceiling of a power converter, because it combines five awkward properties: service life intrinsically limited by electrolyte evaporation (life ÷2 every +10 °C); ESR growing with ageing; capacitance decreasing to ~80 % at end-of-life; sensitivity to ripple current (Pdis = Iripple² × ESR → self-heating → accelerated ageing); and mechanical sensitivity requiring rigid restraint under EN 61373.

3.2 Premium SA strategy — long-life 105 °C capacitors

The first line of defence, when an electrolytic is unavoidable due to capacitance density, is aggressive part selection. Premium SA standardises on aluminium capacitors rated to 105 °C (some ranges to 125 °C in critical applications) with manufacturer-declared service life of 8,000 to 12,000 hours at maximum temperature — equivalent, by Arrhenius, to over 100,000 hours when operated at 50 °C. Combined with the Premium SA derating policy — Vop ≤ 80 % of Vrated, Iripple_real ≤ 80 % of Iripple_rated, Ta_cap < 85 °C in worst case — this pushes the ageing curve well below the product’s service-life horizon.

But “pushing” is not “eliminating”. As long as there is an electrolytic on the DC bus, there is a wear-out component that defines the slope of the bathtub curve at end of life.

3.3 Why digital ripple control changes the rules

The dimensional argument. The DC bus exists for two reasons: to filter rectification ripple (low frequency, ~100 Hz) and to absorb switching ripple (high frequency, tens to hundreds of kHz). Historically, both requirements were covered by the same bank of electrolytics. Digital ripple control allows the two problems to be decoupled. The switching component, by its deterministic nature, can be tackled actively from firmware: interleaved modulation strategies, predictive ripple control and phase-shedding cut RMS ripple per capacitor by factors of 2× to 4×. The low-frequency component is then covered with a much smaller capacitance value, attainable with polypropylene film capacitors that do not wear out significantly. The net result is the substitution of several thousand microfarads of electrolytic with a few hundred nanofarads to microfarads of film, while preserving or improving DC-bus voltage quality.
Aspect DC bus with electrolytics DC bus with film + digital control
Dominant component Aluminium electrolytic 105 °C / 12,000 h Polypropylene film, > 200,000 h
Dominant failure mechanism Electrolyte evaporation (Arrhenius) No significant wear-out mechanism
Thermal sensitivity Life ÷2 every 10 °C Minimal across operating range
Capacitance with ageing Drops to 80 % at end of life No significant drop
ESR evolution Grows ×2 by end of life Stable across full service life
DC-bus function MTBF Limited by the electrolytic Limited by semiconductors
TCO Low BOM, high service cost Higher BOM, lower service cost

3.4 The measurable impact — MTBF, MTTR, reliability

Removing the electrolytic from the DC bus simultaneously moves all three metrics that matter in critical infrastructure. MTBF rises — we have observed typical 5× to 10× improvements in converters where the electrolytic was the limiting factor. MTTR drops because the LRU is replaced less frequently and the spare-parts catalogue is simplified. Reliability R(t) approaches 1 asymptotically over the full 30-year horizon, instead of degrading in the last 10 years due to electrolytic wear-out. These effects are particularly valuable where downtime carries contractual cost: an electrical substation where a fault triggers DSO penalties, or a rolling-stock fleet where a withdrawal from service breaks the operator’s timetable.

4. Design for Reliability — the Methodology that Ties the Advances Together

The two technological levers above are necessary but not sufficient conditions. 30-year reliability also requires a development process that integrates and verifies them. The Premium SA DFR methodology structures the design across four sequential gates — D2W (Design to Work), D2F (Design to Function), D4R (Design for Reliability) and D4Co (Design for Compliance) — each with quantitative exit criteria.

4.1 Mission profile and derating as non-negotiable input

The first artefact of any Premium SA project is the mission profile: maximum and minimum ambient temperature, daily thermal cycles, cyclic humidity, altitude, vibration, expected number of starts over the service life, frequency of S2 supply-interruption events. Without this input, no PoF calculation has any meaning. With it, derating decisions become quantitative.

Component family Premium SA derating rule Physical justification
Power semiconductors Tj ≤ 80 % of Tj_max (≤ 125 °C Si, ≤ 150 °C SiC) Coffin-Manson on wire bonds: Nf falls as (ΔTj)^β
Aluminium electrolytics Vop ≤ 80 % Vrated, Iripple ≤ 80 % rated Arrhenius law on electrolyte evaporation
MLCC capacitors Vop ≤ 50 % Vrated Capacitance loss vs DC bias on X5R/X7R
Resistors Pop ≤ 60 % Prated, Vop ≤ 80 % Vrated Intra-component insulation
Connectors I ≤ 70 % Irated per contact Contact heating under fatigue
Insulation (creepage/clearance) ≥ 1.5× minimum per EN 50124-1 Margin against long-term contamination

4.2 FMEA, FTA and the failure-mode hierarchy

Once derating is set, reliability engineering concentrates on identifying and mitigating the dominant failure modes through two complementary analyses. FMEA (Failure Mode and Effects Analysis) works bottom-up: for each component and each interface, possible failure modes, their causes and their effects are enumerated, with a Risk Priority Number assigned (RPN = Severity × Occurrence × Detection, 1–10 scale). At Premium SA, any RPN > 80 triggers a documented action plan, and RPN > 100 blocks the D4Co gate. FTA (Fault Tree Analysis) works top-down: it starts from the system failure and decomposes the Boolean combinations (AND/OR gates) that can cause it, allowing the impact of redundancies to be quantified and improvements to be prioritised by sensitivity factor.

4.3 The bathtub curve — each phase calls for a different technique

Bathtub phase Dominant cause Control strategy
Infant mortality (0–500 h) Latent manufacturing defects: cold solder, contamination, assembly errors HALT in design + HASS/burn-in in production + 100 % AOI/ICT
Useful life (500–50,000 h) Random events: overvoltage, ESD, mains transients Protections (OVP/OCP/OTP), derating, preventive FMEA
Wear-out (> 50,000 h) Accumulated damage: thermal fatigue, electrolyte degradation, corrosion Low Tj_max, reduced ΔTj, eliminate electrolytics, condition monitoring

4.4 HALT, HASS and burn-in — what each one does

These three techniques are often confused, and they tackle different problems at different moments. HALT (Highly Accelerated Life Testing) is a limit-exploration test in the design phase: combined stresses (temperature + vibration) are progressively applied beyond the specification, until the operational and destruct limits of the product are found. It is not a qualification test, it is a discovery test — the output is the knowledge of how much margin we hold. HASS (Highly Accelerated Stress Screening) is a production-phase variant, with stress levels chosen just below the operational limit, used to detect latent manufacturing defects without consuming the product’s service life. Burn-in operates the product under controlled temperature (typically +60 to +80 °C) and load for several hours to screen the infant-mortality phase. Premium SA standardises 4 h of burn-in per unit, extended to 8 h on programmes with long maintenance intervals.

The three are complementary: HALT explores; HASS screens in production; burn-in cuts the left tail of the bathtub curve. Applied together, the failure rate during the first year in service drops to a fraction of the value without these techniques.

5. The Other Component that Also Ages — the Software

Any modern converter with digital calibration, predictive ripple control, complex protections and communication with the network supervisor carries firmware of growing complexity. From the function-reliability standpoint, this firmware is just another component of the system — and like any other component, it can be the root cause of a failure that compromises availability. The difference is that software does not age physically, but confidence in it erodes if there is no disciplined verification and validation process.

5.1 V-Model and EN 50128 as the framework for railway firmware

The reference standard for railway-application software is EN 50128, part of the EN 5012x family (railway RAMS). Its central element is the V-Model: each level of specification (system requirements, software requirements, architectural design, module design, code) corresponds to a verification level (unit testing, integration testing, system testing, acceptance testing). Each SSIL (Software Safety Integrity Level, levels 1 to 4 plus Basic Integrity) imposes mandatory techniques: formal reviews, static analysis, specific coverage metrics.

SSIL level Typical converter application Mandatory EN 50128 techniques
Basic Integrity Functions unrelated to safety Code review, functional testing
SSIL 1-2 Cabin auxiliaries, monitoring MISRA C static analysis, unit-test I/O coverage
SSIL 3 Traction converters not brake-critical MISRA + decision coverage + timing analysis
SSIL 4 Active safety functions (e.g. brake inhibition) MC/DC coverage, formal models, redundancy

5.2 MISRA C, MC/DC and why they matter

MISRA C:2012 is the de facto standard for embedded firmware in C in critical systems. Its 143 rules (16 mandatory, 111 required, 16 advisory) cover language patterns that have historically been a source of defects: pointer aliasing, implicit conversions, undefined behaviour, dynamic memory management. Applying MISRA with static analysis (PC-lint, Coverity, Polyspace) removes a whole class of defects before execution. MC/DC (Modified Condition/Decision Coverage) is the most demanding coverage criterion routinely applied in certification: it requires that each individual condition within a Boolean decision independently affects the result of the decision. For a decision with n conditions, the minimum number of MC/DC tests is n+1, against the 2n required by combination coverage.

5.3 HIL and firmware verification on real hardware

The technique that closes the verification loop is HIL (Hardware-in-the-Loop). The firmware runs on the real microcontroller, but the input signals (voltage, current and temperature sensors) are synthesised by a real-time simulator that emulates the behaviour of the DC bus, the transformer, the motor or the load. This allows thousands of scenarios to be executed — including sensor failures, mains transients, short-circuits — with no physical risk to the equipment or to the test bench. A well-designed HIL programme catches hardware/software integration defects that no unit test could capture.

6. RAMS — the Metric that Ties Everything Together

RAMS stands for Reliability, Availability, Maintainability, Safety — the four metrics a railway operator or a grid DSO uses to judge the suitability of a unit across its service life. EN 50126 is the framework standard; EN 50128 and EN 50129 cover software and functional safety respectively.

A = MTBF / (MTBF + MTTR) — High availability requires both high MTBF and low MTTR simultaneously. Optimising only one of the two is not enough: a unit with excellent MTBF but several days of MTTR will deliver lower availability than a unit with moderate MTBF but well-designed LRU architecture. The technological levers above act on both. Removing potentiometers and electrolytics raises MTBF; LRU design with front access, captive screws and keyed connectors lowers MTTR. Digital control, telemetry and self-test reduce diagnostic time — the slice of MTTR hardest to optimise.

6.1 The full R-A-M-S quadrant

Metric Operating definition Dominant design lever
Reliability Probability of fault-free operation across t Component selection, derating, wear-out elimination
Availability Fraction of time the system is operational MTBF + MTTR; redundancy where applicable
Maintainability Ease and speed of diagnosing and repairing LRU design, telemetry, FRACAS, parts continuity
Safety Absence of unacceptable risk FTA, safe failure modes, software SSIL, redundancy of critical functions

6.2 FRACAS — the continuous learning loop

FRACAS (Failure Reporting, Analysis and Corrective Action System) is the process by which every field return is analysed at the appropriate level — LRU, board, component — the root cause is identified, and the corrective action is propagated back to design and production. Premium SA runs FRACAS as a closed loop between Quality, Aftersales and R&D. The consequence is that the fleet population improves over time, rather than degrading: the issue detected in unit #150 is prevented in unit #151.

6.3 PHM and the move to predictive maintenance

The active technical frontier today is PHM (Prognostics and Health Management): the transition from fixed scheduled maintenance toward maintenance based on the actual condition of the equipment. In Premium SA converters we progressively implement: real-time Tj estimation of power semiconductors from Vce_sat and current; cumulative power-cycle counting with the associated ΔTj to predict RUL (Remaining Useful Life) via PoF models; capacitor ESR monitoring by ripple analysis; and periodic export of operational data to the operator’s supervisor over the communications bus. The result is that the operator no longer has to choose between excessive preventive maintenance and late corrective maintenance — the equipment reports how much life is left.

7. Synthesis: the Concrete Levers that Make 30-Year Reliability Viable

Technological lever Failure mode it removes RAMS effect
Eliminating the potentiometer (digital + laser) Wiper wear, vibration/humidity drift, human error in maintenance Raises R, lowers MTTR
Reducing/eliminating the electrolytic (digital control + film) Arrhenius wear-out of electrolyte Raises MTBF 5–10×; flattens bathtub tail
Selection of 105–125 °C long-life electrolytics (where unavoidable) Accelerated Arrhenius ageing of the limiting component Pushes wear-out beyond the 30-year horizon
DFR + mission profile + derating Random faults and overstress in the useful-life phase Raises R in the central area of the curve
HALT in design + HASS/burn-in in production Latent manufacturing defects (infant mortality) Flattens the left tail of the bathtub curve
Software V&V (V-Model, MISRA, MC/DC, HIL) Systematic firmware faults The component that closes the case for a 30-year claim
LRU design + FRACAS + 30-year parts continuity High MTTR and mid-life obsolescence Raises A via the MTTR lever; protects the full lifecycle
PHM + condition monitoring Inefficient maintenance (excessive preventive or late corrective) Optimises total cost of ownership
The takeaway. Components and systems will eventually degrade — that is thermodynamics, not opinion. The job of the power-electronics engineer for critical infrastructure is not to deny degradation but to push it past the product’s service-life horizon, and to ensure that when it does appear it does so in a diagnosable, predictable and inexpensively repairable way. Removing electromechanical components removes failure mechanisms. Reducing or eliminating electrolytics removes the dominant wear-out. Laser trimming and digital adjustment substitute the mechanical wiper with solid state. Digital ripple control turns a hardware problem into a software problem. And software, with the right V&V process, stops being a source of systematic failure. What remains — semiconductors with strict derating, well-cooled magnetics, keyed connectors, conformal coating, an active FRACAS loop and telemetered PHM — is a system whose reliability can be honestly committed to 30 years.

About Premium PSU — With over 40 years of experience, Premium SA designs and manufactures custom power converters in Barcelona for railway, energy, industrial, data center and defence applications.

Contact our engineering team.

railway
Application Notes

EN 50155: A Practical Guide to Specifying Railway Electronics

Application Note · Railway

EN 50155: A Practical Guide to Specifying Railway Electronics

Temperature classes, voltage ranges, supply interruptions and companion standards: how to move from “EN 50155 compliant” to an unambiguous specification.

EN 50155:2017 is the European standard that defines the requirements for electronic equipment used on railway rolling stock. Any power converter, inverter, battery charger or electronic system installed on a train in Europe must comply with it. Yet it is in the way compliance is specified that most mistakes are made.

This article explains, in practical terms, how to use EN 50155 to specify the power electronics of a railway project correctly. It is not an academic summary of the standard: it is an operational guide based on what we have learned across hundreds of railway projects. For a general introduction to the standard, see What is EN 50155 for railway applications?

The most common mistake: “EN 50155 compliant”

Specifying that a unit must be “EN 50155 compliant” is like ordering a car “compliant with emissions regulations” without saying whether you need a city runabout or an off-roader. EN 50155 defines a framework of options, and each project must select the right ones. If your specification simply says “EN 50155”, the supplier will choose the options that are easiest (and cheapest) to meet, which may not be the ones your application needs.

Parameter 1: temperature class

EN 50155 defines six temperature classes that set the operating range of the equipment:

Class Operating range Typical application
OT1 −25 °C to +55 °C Passenger compartments and driver’s cabs
OT2 −40 °C to +55 °C Passenger compartments and driver’s cabs in cold climates
OT3 −25 °C to +70 °C Technical cabinets and equipment compartments (default class)
OT4 −40 °C to +70 °C Technical cabinets in cold climates
OT5 −25 °C to +85 °C High-temperature locations (e.g. roof or underframe equipment)
OT6 −40 °C to +85 °C High-temperature locations in cold climates

Choosing the temperature class is not trivial. Our ODS-3000 inverter was originally designed for a lower operating limit of −25 °C. When a rolling-stock manufacturer needed a −40 °C variant for arctic service, we had to change the electrolytic capacitors (standard parts lose 80% of their capacitance at −40 °C), add a pre-conditioning circuit and run a full qualification campaign including 96-hour soaks at −40 °C.

Parameter 2: input voltage range

The standard defines nominal voltage ranges for the train’s DC buses:

Nominal voltage Continuous operating range (0.7–1.25 Un)
24 Vdc 16.8 – 30.0 Vdc
48 Vdc 33.6 – 60.0 Vdc
72 Vdc 50.4 – 90.0 Vdc
96 Vdc 67.2 – 120.0 Vdc
110 Vdc 77.0 – 137.5 Vdc

Short fluctuations from 0.6 Un (0.1 s) up to 1.4 Un (1 s) must also be withstood. The converter must operate correctly across the whole specified range, including the transient conditions defined in the standard. Always specify the full range, not just the nominal voltage.

Parameter 3: supply interruption class

EN 50155 defines how equipment must behave when the supply is briefly interrupted (for example, when crossing a neutral section or when the pantograph loses contact with the overhead line):

  • S1: no ride-through. The unit shuts down and restarts when the supply returns.
  • S2: 10 ms ride-through. Withstands short interruptions without restarting.
  • S3: 20 ms ride-through.

For critical systems (protection, communications, signalling), S2 or S3 is usual. For comfort systems (passenger sockets, non-essential lighting), S1 may be acceptable.

Beyond EN 50155: the companion standards

EN 50155 is not the only applicable standard. All railway electronic equipment must also comply with:

  • EN 50121-3-2: electromagnetic compatibility (EMC). The electromagnetic environment on a train is extremely harsh.
  • EN 45545-2: fire protection. Materials must meet specific requirements for flammability, smoke emission and toxicity.
  • EN 61373: shock and vibration. Vibration levels on rolling stock are significantly more severe than in industrial applications.

Make sure your specification covers all four standards. A unit that meets EN 50155 but not EN 45545-2 cannot be installed on a European train.

How to specify correctly: a practical summary

For your next project, include at least the following in the specification:

  1. Temperature class (OT1–OT6).
  2. Nominal voltage and full operating range.
  3. Supply interruption class (S1/S2/S3).
  4. EMC requirements (EN 50121-3-2).
  5. Fire class (EN 45545-2, stating the hazard level HL1/HL2/HL3).
  6. Vibration category (EN 61373: Cat. 1 body-mounted (Class A or B), Cat. 2 bogie-mounted, Cat. 3 axle-mounted).

With these six parameters clearly defined, you will receive comparable quotations and avoid the surprises that appear when a specification is ambiguous. Need help specifying EN 50155 power electronics? Our technical team in Barcelona can advise you.

About Premium PSU

Premium PSU (Premium SA) designs and manufactures custom power supplies and power converters in Barcelona, with over 40 years of experience in railway, energy, industrial, data centre and defence applications.

Talk to our engineering team

Discuss your power conversion requirements with Premium PSU.

Contact us

The DC Power Standards Map for European AI Data Centres
Application Notes, Data Center

The DC Power Standards Map for European AI Data Centres

Standards · Data Center

The DC Power Standards Map for European AI Data Centres

Five principles, three architectures and an international alliance: who is writing the LVDC rules for the 800 VDC AI data centre, and what they mean for power electronics manufacturers.

Contents

  1. OCP DCF Power Distribution LVDC: the canonical document
  2. Schneider Electric WP213: five principles for adoption
  3. The OCP × Current/OS alliance: an open standard for DC
  4. IEC and the European standards landscape
  5. Implications for European power electronics manufacturers

The transition to low-voltage direct current as the distribution architecture of the European AI data centre is not only a hardware change. It is a standards and ecosystem change being built in real time, with the active participation of the sector’s principal industrial actors. The OCP EMEA Summit 2026, held in Barcelona in April 2026, was where that process took its most visible step: the approval of the OCP white paper on Low Voltage DC Power Distribution as a contribution to the Open Data Center Ecosystem for AI, and the presentation of Schneider Electric’s five principles for 800 VDC adoption.

This article maps the emerging standards territory — who is writing the rules, what the rules are, and what the implications are for European power electronics manufacturers that want to take part in this market.

OCP DCF Power Distribution LVDC: the canonical document

The OCP Foundation’s DCF Power Distribution LVDC white paper (version 1.0) was approved on 29 April 2026, the first day of the OCP EMEA Summit in Barcelona; OCP has since published version 1.1.0. Its co-leadership corresponds to Eaton and ABB, the volunteer co-leads of the OCP Power Distribution Project.

The document’s operational definition delimits the perimeter of the entire conversation: LVDC (Low Voltage Direct Current) is defined as direct voltage equal to or below 1,500 VDC. The 800 V bus — the ±400 V of the Mt. Diablo specification — falls comfortably within that range. The document specifically addresses LVDC distribution as the interface between incoming Medium Voltage AC (MVAC, currently in the facility grey space) and rack compute in the IT white space.

Of particular relevance to power electronics manufacturers is its treatment of MVAC-to-LVDC conversion — either via a Solid State Transformer (SST) or via a combination of a conventional MV/LV transformer with an isolated or non-isolated AC/DC converter. These are exactly the stages of the sidecar in Architecture 1 (LV input) and of the sidecars in Architectures 2 and 3 (MV input) of the Schneider Electric roadmap.

Schneider Electric WP213: five principles for adoption

Schneider Electric’s white paper 5 Principles for 800 VDC in AI Data Centers: Rack-level Architectures as the Immediate Enabler — published in March 2026, is the reference document of one of the world’s largest energy management manufacturers on the transition to 800 VDC. It identifies 800 VDC power racks — explicitly called sidecars in the abstract — as the immediate enabler of the transition.

The five principles the document proposes are the axes on which designers and operators should evaluate and adopt 800 VDC architectures:

  • Architectural variations. There is no single 800 VDC architecture. The document distinguishes between localised distribution (sidecar), centralised distribution with LV converters and centralised distribution with SST — each with different time horizons, scales and levels of complexity.
  • Ecosystem availability. The maturity of components — SiC rectifiers, WBG DC/DC shelves, connectors, manifolds, protection gear — is the variable that determines when and at what scale each architecture can be deployed.
  • Protection coordination and earthing. The transition to 800 VDC introduces specific challenges in arc fault protection and earthing schemes — 2-wire vs. 3-wire DC — that call for standards review and dedicated protection coordination studies for high-voltage DC.
  • Energy storage integration. Backup systems at 800 V change the sizing logic of the BBU and open the door to LIC or supercapacitor solutions connected directly to the DC bus, without an intermediate conversion stage.
  • Operational execution. Operator training, service procedures in 800 VDC installations, fault management and diagnostic tools are a matter of deep operational change that is not solved by the choice of hardware alone.

The OCP × Current/OS alliance: an open standard for DC

The third vector of the standards ecosystem is the alliance between the OCP Foundation and Current/OS, formalised in December 2025. Current/OS is an independent, non-profit global partnership that promotes open standards for interoperable DC microgrids and is developing a DC standard and DC-certified products for buildings and installations.

The alliance was promoted by the volunteer co-leads of the OCP Power Distribution Project — precisely Eaton and ABB, the same companies co-leading the LVDC white paper. Its stated objective is to combine OCP’s experience in open data centre hardware with the Current/OS standards for interoperable DC, creating what the announcements described as a vendor-neutral operating system for DC-powered data centres.

In addition, on 29 April 2026 — the opening day of the Summit — the OCP Foundation announced a new alliance with the Electric Power Research Institute (EPRI), aimed at integrating the dynamic management of AI data centres with grid services such as demand response, virtual power plants and frequency regulation.

IEC and the European standards landscape

The IEC landscape for LVDC is under active construction, with three standards families of direct relevance to the sidecar. IEC 62477 (Power Electronic Converter Systems) establishes the general safety requirements for power electronic converters, including the DC/DC conversion stages of the sidecar. IEC 62109 (Safety of Power Converters for Use in Photovoltaic Power Systems) provides a precedent for DC converter safety testing methodologies that can be applied by analogy to the data centre context. IEC 60364-8-1 (functional aspects — energy efficiency of low-voltage electrical installations) sets the energy-efficiency framework for the low-voltage installations that host this infrastructure.

Arc fault protection in DC systems above 400 V is one of the least mature areas of the standards landscape for data centre applications. This is both a regulatory risk — installations may require case-by-case assessment by notified bodies — and an opportunity for manufacturers that develop and qualify arc fault protection solutions for the 800 VDC sidecar.

Implications for European power electronics manufacturers

The standards landscape described above has five direct implications for European power electronics manufacturers targeting the data centre market:

  • Mt. Diablo compliance is likely to become a commercial requirement, so component qualification should be planned early.
  • Arc fault protection is an open technical and regulatory problem in which early movers can make a difference.
  • Converter-level telemetry will be required at converter level by operators building on the OCP LVDC architecture.
  • High availability requirements for inference data centres impose MTBF and redundancy requirements consistent with railway and defence-grade power electronics.
  • European traceability requirements under the EU Chips Act and the Cyber Resilience Act will progressively require documented supply chain provenance for critical infrastructure components, including data centre power electronics.

References

  • Open Compute Project Foundation — DCF Power Distribution LVDC white paper (v1.0 approved 29 April 2026; v1.1.0 published subsequently).
  • Schneider Electric — 5 Principles for 800 VDC in AI Data Centers (March 2026).
  • Open Compute Project Foundation and Current/OS — strategic alliance announcement (December 2025).
  • Open Compute Project Foundation and EPRI — alliance announcement (29 April 2026).
  • IEC 62477-1:2022 — Safety requirements for power electronic converter systems and equipment.
  • IEC 60364-8-1:2019 — Low-voltage electrical installations, Part 8-1: Functional aspects, Energy efficiency.
About Premium SA — Premium SA is a Barcelona-based designer and manufacturer of custom power converters for railway, energy, industrial, data centre and defence applications. Founded in 1981, the company brings over 40 years of experience in high-reliability power electronics.

Power designed for your application

Talk to our engineering team about power conversion for 800 VDC data centre architectures.

Contact the technical team

Del bus 800 V ferroviario al rack de IA
Application Notes, Data Center

From the 800 V Railway Bus to the AI Rack: The Power Conversion Chain Premium Already Knows

Engineering Insight · GaN / HVDC

From the 800 V Railway Bus to the AI Rack: The Power Conversion Chain Premium Already Knows

How experience with 800 V traction converters applies to the 800 VDC sidecar architecture for AI data centres: GaN, the ALL2GaN programme and the EV supply chain.

Contents

  1. The convergence the summit confirmed
  2. ALL2GaN T6.2 Transport: programme context
  3. Why GaN is the sidecar technology
  4. The EV supply chain as a bridge between worlds
  5. Key data points presented at OCP EMEA Summit 2026
  6. Sources

The European ALL2GaN programme closed its thirty-six months of work in April 2026, at the same time as the AI data centre ecosystem was holding its largest annual gathering in Barcelona. The timing is telling: it marks the moment at which European gallium nitride and the high-voltage DC conversion architecture of the data centre converge on the same point of the industrial roadmap. This article reviews the data points presented at the OCP EMEA Summit 2026 that support this convergence with verifiable external evidence.

The convergence the summit confirmed

The convergence between the 800 V bus of railway traction and the 800 V bus of the AI data centre had until recently been a prospective thesis. The OCP EMEA Summit 2026 turned it into an established fact, documented by three independent industrial sources.

Schneider Electric set the limit of the 54 VDC bus at 400 kW/rack — the same threshold above which HVDC architecture becomes necessary, not optional. OmniOn Power quantified the difference: moving from the ORv3 chain (480 V → 54 V → 12 V → core, η 83.8 %) to the Next Gen 800 V chain (480 V → 800 V → 54 V → 12 V → core, η 85.8 %) saves 1.9 percentage points of efficiency — 2 MW for every 100 MW of installed DC capacity. Eaton displayed at the CCIB Innovation Village a physical prototype of the 800 V DC Side Car with a 33 kW ORV3 Power Shelf and scalable DC connectors at 63, 125 and 250 A.

The most significant data point, however, was not a number but a sentence. Schneider Electric, in its Day 2 plenary keynote, justified the 800 V sidecar with four arguments, the last of which was: leverages established EV supply chain. The EV supply chain — the same value chain in which Premium operates with its portfolio of converters for traction, e-mobility and railway auxiliaries — is the argument one of the world’s leading energy management manufacturers used to explain why the 800 V sidecar is the lowest-risk option in the short term.

“48–54 VDC rack power distribution and 480 VAC supply voltage approaches reach practical limits beyond ~400 kW/rack.”

— Schneider Electric, OCP EMEA Summit 2026, Barcelona, 30 April 2026

For a broader overview of the architecture, see The 800 VDC revolution: the energy engine behind AI.

ALL2GaN T6.2 Transport: programme context

The ALL2GaN programme — Affordable smart GaN IC solutions for greener applications — was launched in May 2023 in Villach and closed in April 2026. Coordinated by Infineon Technologies Austria AG, funded by the Chips Joint Undertaking (successor to KDT-JU) and framed within the European Chips Act and the Green Deal, it involved 45 industrial and research partners from twelve European countries.

Premium SA participates in the programme’s Transport cluster as a contributor to the development of compact power electronics building blocks for auxiliary applications. The UC3 use case from the official WP6 M36 deliverable defines the technical context: power converters for traction auxiliaries meeting the temperature, vibration, EMC and reliability requirements of the railway environment certified to EN 50155. This is exactly the design discipline profile the 800 V sidecar for data centres requires.

Why GaN is the sidecar technology

Gallium nitride is not merely an incremental improvement over silicon for DC/DC converters. It is the technology that makes possible the WBG DC/DC shelf stage of the Next Gen 800 V chain — the conversion from 800 V to 54 V at η 98.50 % in a high power density format.

GaN’s advantages over silicon in this context are threefold. First, the switching frequency can be five to ten times higher than conventional silicon, reducing the size of magnetic components and enabling power densities above 40–60 W/in³ on platforms with PCB-integrated planar magnetics. Second, switching losses are dramatically lower, with peak efficiencies above 97–98 % in real operation — not just catalogue conditions. Third, compared to SiC, GaN offers a complementary sweet spot in the medium-voltage, high-frequency band that is exactly the one dominating the WBG DC/DC shelf stage of the 800 V sidecar.

The contribution of the ALL2GaN programme is that these advantages now have a verified industrial value chain in Europe: from substrate to packaging, from reliability to application, production can be carried out entirely within the Union. This answers the industrial sovereignty question the sidecar architecture will face as regulated European hyperscalers demand supply chain traceability for their power components.

The EV supply chain as a bridge between worlds

The Schneider Electric phrase — leverages established EV supply chain — has an immediate practical implication for any power electronics manufacturer with a background in traction or e-mobility.

The components that make the 800 V sidecar possible — high-current DC connectors, high-voltage DC busbars, 4,000–5,000 A DC circuit breakers, copper cables with insulation for 800–1,000 V — are the same components the EV industry has standardised over the past decade. The technical qualifications, insulation tests, DC arc tests and earthing protocols developed for the electric vehicle are directly applicable to the data centre sidecar.

For Premium SA, which has operated for over 40 years in the railway and industrial power electronics supply chain for high-reliability applications, this has a direct technical reading: the company’s industrial track record is not just a credibility antecedent — it is the technical foundation that the sidecar market requires.

Key data points presented at OCP EMEA Summit 2026

Data point Technical implication
54 V bus limit: ~400 kW/rack (Schneider Electric) Defines the threshold above which HVDC distribution becomes necessary. A publicly verifiable data point.
Copper mass 200 kg → 13.5 kg per 1 MW rack (OmniOn Power) Quantifies the physical and material advantage of 800 V distribution.
Chain efficiency gain: +1.9 pp (ORv3 83.8 % → 800 V 85.8 %) (OmniOn Power) Concrete efficiency improvement across the full conversion chain, with public attribution.
“Leverages established EV supply chain” (Schneider Electric) Components, qualifications and test practices from traction and e-mobility carry over to the 800 V sidecar.
Physical 800 V DC Side Car prototype (Eaton) Confirms the architecture has moved from literature to product engineering.

Key takeaway: the convergence of the 800 V bus of railway traction with the 800 V bus of the AI data centre is no longer a thesis but an industry consensus, as the OCP EMEA Summit 2026 confirmed. Schneider Electric set out the case for the sidecar. Eaton showed a physical prototype. OmniOn Power quantified that every 100 MW of DC capacity installed at 800 V instead of 54 V saves 2 MW in losses — and that the copper mass per 1 MW rack drops from 200 to 13.5 kg.

Sources

  • ALL2GaN (Chips JU, formerly KDT-JU) — WP6 M36 public deliverable (UC3, T6.2 Transport).
  • Schneider Electric — keynote, OCP EMEA Summit 2026 (30 April 2026): “Next-generation AI rack densities”, “The sidecar is the immediate enabler.”
  • OmniOn Power — Philip Zuk keynote, OCP EMEA Summit 2026 (29 April 2026): ORv3 vs. 800 V chain and Osprey portfolio.
  • OCP Foundation — DCF Power Distribution LVDC v1.0 (29 April 2026).

Power designed for your application

Premium SA designs and manufactures industrial power converters in Barcelona for railway, data centre and electrification applications.

Contact the technical team

Three-phase resonant converters and planar magnetic integration
Application Notes, Energy

Three-phase resonant converters and planar magnetic integration

PREMIUM SA · ENGINEERING INSIGHT · HIGH-DENSITY RESONANT CONVERSION · 2026

Three-phase resonant converters and planar magnetic integration

Topologies, current-balancing control and 1 MHz planar magnetics: the route to ultra-high power density in DC-DC.

Premium PSU

 

Executive summary

Resonant converters are the cornerstone of high-efficiency DC-DC stages in EV fast chargers, server supplies and telecom infrastructure. Their LC resonant network shapes the waveforms to achieve soft switching —ZVS on the primary and ZCS on the secondary rectifiers—, virtually eliminating switching losses and enabling high-frequency operation with smaller passives.

Moving from single-phase to three-phase interleaved with a 120° phase shift naturally cancels the output current ripple through phase superposition, dramatically shrinks the output capacitor filter and spreads thermal losses across the semiconductors. In exchange it triples the magnetic component count and exposes the system to inter-phase current imbalance from manufacturing tolerances (typically ±10 %). This article walks through the topologies (LLC, CLLC, LCC, SRC), the balancing strategies (floating star, CPAB), hybrid PFM+PSM modulation, and the planar magnetic integration that —together with AlN conductive cooling— enables 1 MHz operation at ultra-high power density.

Prototype and improvement figures are traced to the peer-reviewed literature listed at the end; material properties to public literature. Where a figure lacks verifiable backing, it is explicitly flagged as pending source confirmation.

> 98 %Peak efficiency in a 30 kW three-phase LLC EV charger (SiC)
120°Phase shift that cancels output ripple and shrinks the filter
< 5 %Phase imbalance with floating star + CPAB control
1 MHzTarget frequency enabled by WBG and planar integration

Why three-phase: 120° ripple cancellation

Single-phase resonant converters perform well at low power but exhibit high output current ripple that subjects the filter capacitors to severe thermal and ripple-current stress, forcing them to be oversized. The three-phase interleaved structure removes this bottleneck: operating the three legs with a 120° phase shift between gating signals, the sum of the phase-shifted rectified currents yields an almost continuous power flow with very low residual ripple. The immediate effect is a drastic reduction in the size and capacitance of the output filter, with the corresponding gain in power density and better thermal distribution across the semiconductors.

The schematic below places the full conversion chain and anticipates where power density is won: the integrated planar magnetic core.

Three-phase resonant converters and planar magnetic integration

Three-phase resonant network topologies

The dominant high-frequency topologies are LLC, CLLC and LCC, each with a distinct gain, impedance and bidirectional profile. In the LLC, each phase integrates a series resonant inductor (Lr), a series capacitor (Cr) and the transformer’s parallel magnetizing inductance (Lm); below the resonant frequency, Lm participates and provides a boost capability. The resonant frequencies are governed by fr1 = 1/(2π·√(Lr·Cr)) and fr2 = 1/(2π·√((Lr+Lm)·Cr)), and the inductance ratio is m = Lm/Lr; operating fs near fr1, the converter reaches its peak-efficiency point with unity gain.

Table 1 — Comparison of resonant topologies (traced to literature).

Topology Soft switching Bidirectionality Gain range Typical application
LLC Full primary ZVS; secondary ZCS below resonance Asymmetrical; high reactive current in reverse Moderate; strongly load-dependent far from resonance Unidirectional EV chargers, server/telecom PSU
CLLC Symmetrical ZVS in both power-flow directions Completely symmetrical (dual tanks) Wide; optimized for variable battery voltage Bidirectional EV chargers, V2G interfaces
LCC ZVS over a wide range down to zero load Asymmetrical (Cp alters reverse gain) Exceptionally wide; excellent at light load High voltage, capacitor charging, wide-range adapters
SRC Primary ZVS above resonance Symmetrical Narrow; gain strictly bounded below unity Fixed-ratio DC-DC, narrow-range bus converters

On the primary connection, the delta option (Δ-Cr) reduces the tank current by a factor of √3 —cutting the winding copper loss to one third versus the parallel star— but imposes a penalty: the volt-second stress on the high-frequency transformer also rises by √3.

Floating star (Y-primary) and natural current sharing

The most common configuration connects the three transformer primaries in a star with a common floating neutral point. This connection dynamically modulates the neutral-node voltage, reshaping the resonant currents toward a more rectangular than sinusoidal waveform: by flattening the peaks, it lowers the peak and RMS current versus a single-phase converter of equal power, reducing conduction losses. More importantly, it provides a natural current-balancing capability far superior to independent parallel converters.

Self-compensation and MTBF. Under resonant-capacitor tolerance or degradation (a common failure mode in high-temperature environments), the floating neutral shifts dynamically to accommodate the drift, preventing localized thermal runaway on an ageing phase. This passive, zero-cost balancing limits the mean current mismatch to under 15 % without any active control, and extends system MTBF.

Current imbalance and active mitigation

Despite the star node’s natural balancing, passive-component manufacturing tolerances (typically ±10 %) shift each phase’s impedance and produce thermal asymmetry and extra output-capacitor ripple. Hardware solutions (balancing transformers) add loss and volume, so active control is preferred:

  • CPAB (Current Phase Angle Balancing): directly regulates the phase angles of the resonant currents with dedicated PI loops to hold an exact 120° spatial displacement, limiting residual mismatch to under 5 % even under severe tolerances. It outperforms the historical TCB (Trigonometric Current Balancing), which has poor transient response.
  • RMS-based real-time algorithm: measures the individual RMS currents and linearly adjusts the input-voltage phase shifts (V and W channels relative to the U reference), reducing the imbalance factor to under 2 % across the full frequency range.
  • Phase-Shift Modulation (PSM): in two-module parallel three-phase structures, PFM regulates voltage and PSM shares current; a 30° displacement between modules minimizes total output ripple.

Stable implementation demands careful loop design: in a reference application, the voltage loop (PFM) uses a PI compensator with a 5 kHz crossover and 96° phase margin, while the current-sharing loop (PSM) uses integral compensators with a lower 500 Hz crossover and 91° margin to avoid loop interaction. With a physical mismatch of LrA=20 µH and LrB=16 µH, without active sharing the phase shifts lock at an identical 40.5°; with PSM active the controller dynamically diverges them (41.8° and 39.2°) and restores current symmetry.

Hybrid PFM + PSM modulation

Conventional PFM control varies the switching frequency to regulate voltage, but very wide voltage ranges (an EV charger may span 200 V to 1000 V) force it to sweep a huge frequency spectrum, complicating the EMI filter, drivers and magnetics, and increasing circulating-current losses far from resonance. The hybrid scheme uses PFM below resonance (boost mode, high efficiency) and activates PFM+PSM above it: shifting the phase angle between legs generates a three-level voltage waveform that adjusts the tank’s effective excitation, minimizing the frequency range and reactive circulating energy. The VCR-based VFSHC variant switches modes without transients and completely eliminates the «inoperative region» of conventional hybrid schemes.

Planar magnetic integration: three in one

The main drawback of three-phase is the escalation of magnetic components: three independent inductors and three transformers raise volume, cost and assembly complexity. Planar integration merges them into a single structure. Splitting the primaries across the legs of a three-column core, the sum of the 120°-shifted fluxes cancels in the center leg, which dramatically reduces core losses and simplifies thermal management. With WBG semiconductors (SiC/GaN) the frequency rises to the 500 kHz–1 MHz+ range, enabling PCB copper windings and very low-profile planar cores.

Not all geometries are equal. The classic square integrated core suffers asymmetrical reluctance paths —the center leg is shorter than the outer ones— which induce phase imbalance. An elegant spatial solution is the cylindrical planar core, which enforces complete three-dimensional symmetry and aligns the reluctances of the three phases. For very high currents, the matrix transformer (series primaries, parallel secondaries) distributes voltage stress and heat dissipation.

Table 2 — Planar magnetic integration strategies (traced to literature).

Strategy Core complexity HF loss reduction Reluctance symmetry Engineering challenge
Discrete parallel cores Low (standard cores) Low (no flux cancellation) High (independent paths) Large volume, low density, high cost
Square integrated core Moderate (single E-core) Moderate (center-leg cancellation) Low (outer legs longer) Asymmetry → phase imbalance
Cylindrical symmetrical core High (custom geometry) High (optimized uniform flux) High (complete 3D symmetry) Custom manufacturing and winding
Matrix transformer High (multi-core series-parallel) High (distributed core volume) High (symmetrical PCB routing) High secondary leakage inductance; routing

Core thermal management at 1 MHz: the role of AlN

As frequency rises to 1 MHz, ferrite core losses grow and push planar components toward their thermal margins. The reflex of inserting a metal piece (copper, aluminium) to cool the transformer internally is counterproductive: the alternating magnetic field induces severe eddy currents in the metal, sending losses up. The solution is a material that conducts heat but insulates electrically: aluminium nitride (AlN).

AlN combines a high thermal conductivity —on the order of 150–180 W/(m·K), and up to 230 W/(m·K) in premium commercial grades, comparable to some metals— with high dielectric strength. It is also 7 to 10 times the thermal conductor of alumina (Al₂O₃, ~30 W/(m·K)), cheap but poor, and unlike beryllium oxide (BeO, ~260 W/(m·K)) it is non-toxic. Being a non-conductive ceramic, interleaving thin AlN plates (e.g., 0.5 mm) within the ferrite block stack creates internal conductive cooling channels without inducing parasitic currents, draining heat from the inner —typically hottest— regions and lowering the core’s peak temperature.

Rigour on the improvement figures. Thermal-optimization studies report that a 1 MHz ferrite core with embedded 0.5 mm AlN layers would admit an increase on the order of 167 % in its admissible heat-generation density (theoretical models in the 173–187 % range), and that dedicating 30 % to 35 % of the core volume to AlN would maximize the sustainable useful flux. These specific figures could not be verified against independent public literature and are carried over as a simulation-study datum pending source confirmation; the AlN material properties are supported by materials literature. Recommendation: validate experimentally before publishing the improvement figures as a closed datum.

WBG semiconductors: the enabler and its constraints

High-frequency operation is made possible by wide-bandgap semiconductors. Versus silicon (Eg 1.1 eV, critical field 0.3 MV/cm, mobility 1400 cm²/V·s), SiC (3.3 eV, 3.0 MV/cm, 900 cm²/V·s, excellent thermal conductivity) and GaN (3.4 eV, 3.3 MV/cm, 2000 cm²/V·s) allow thinner drift regions, lower Rds(on) and blocking voltages from 650 V (lateral GaN) to 1200 V+ (vertical SiC).

The price is demanding hardware design. dv/dt of hundreds of volts per nanosecond excites circuit parasitics, generating oscillations, EMI and instability. In E-mode GaN, with a narrow gate window (−10 V to 7 V) and low threshold (Vth < 2 V), gate crosstalk can trigger catastrophic false turn-on events. The designer must use gate drivers with active Miller clamp, Kelvin source connections and strictly symmetrical PCB layouts to suppress spikes and keep the soft-switching boundaries.

Validated prototypes

Industry has built and measured several platforms that confirm the architecture’s advantages:

Table 3 — Published prototypes (parameters and achievements, traced to literature).

Platform Topology f_sw Voltage / power Efficiency and achievement
30 kW EV charger Three-phase interleaved LLC (SiC) 135–250 kHz Vin 650–850 V; Vout 200–1000 V Peak > 98 %; full load > 97 %
10 kW high-density CLLC Three-phase CLLC High frequency 800 V DC bus Peak 97.5 %; cylindrical planar; minimal imbalance
500 W single-stage AC-DC Matrix switch + LLC 465–547 kHz Vin 100 V AC; Vout 130 V DC Peak 97 %; PF 0.99; THD 3.95 %
4 kW bidirectional Three-phase LCC High frequency 320 V ↔ 28 V battery Peak 92.2 %; range 0–12.5 A / 0–142 A
3.6 kW grid-tied Interleaved LLC Synchronous frequency 48 V output CPAB controller with verified stable sharing

Synthesis — Premium SA design criterion

Translated into project recommendations, the three-phase resonant architecture is ordered as follows:

  • Bidirectional → CLLC: for V2G and grid storage, CLLC over LLC guarantees symmetrical gain and identical soft-switching boundaries in both directions.
  • Passive balancing → floating star: in high power with expected ageing or tolerances, the floating Y node provides zero-cost balancing (<15 %) and drift self-compensation.
  • Fine balancing → CPAB software: for critical applications, CPAB alongside the floating node drives the mismatch below 5 % with no extra hardware.
  • Wide range → hybrid PFM+PSM (VFSHC): limits the frequency spectrum, optimizes the planar magnetics and avoids the inoperative region.
  • Density → planar magnetics + AlN: cylindrical or matrix cores to cancel flux and spread heat; AlN conductive cooling to raise the thermal limit at 1 MHz without inducing eddy currents.
  • WBG → disciplined layout: active Miller clamp, Kelvin source and PCB symmetry to tame SiC/GaN dv/dt.

Sources and traceability

Premium SA internal catalogue: block B4 (resonant and multilevel topologies, manual_avanzado_diseno), B8 (passive/magnetic components), B7 (advanced thermal management). Consistent with the Premium article «Multilevel Inverters» v1.0 (no overlap: that one covers the inverter stage; this one, the resonant DC-DC stage).

External technical literature (selection):

  • Three-phase architecture and control: studies on three-phase LLC/CLLC/LCC, current sharing, CPAB and hybrid PFM-PSM modulation (IEEE/MDPI/ResearchGate; Wolfspeed 30 kW SiC charger).
  • Planar integration: cylindrical symmetrical core and matrix transformers for high-frequency three-phase LLC (MDPI Energies; magnetic-integration thesis, White Rose).
  • AlN properties: materials data (Kyocera, Precision Ceramics, substrate manufacturers): λ 150–230 W/(m·K) by grade; alumina ~30 W/(m·K); BeO ~260 W/(m·K), toxic; CTE matched to Si.
  • AlN power-improvement figures: simulation study cited in the source material — pending primary-source confirmation before publication as a closed datum.

 

About Premium SA

Premium SA is a Barcelona-based manufacturer of electronic power converters for railway, industrial and energy applications. With more than 900 standard product designs and over 40 years of operational experience, Premium SA supplies DC/DC converters, DC/AC inverters, AC/AC frequency converters, battery chargers, rectifiers and UPS systems from 50 W to 72 kW.

The D2x / DFR methodology integrates topology, digital control and the magnetic-thermal architecture as coupled decisions from the conceptual phase, with a preference for custom solutions, WBG semiconductors and traceable experimental validation.

Premium PSU
Premium SA · Barcelona, Spain · info@premiumpsu.com · +34 932 232 685 · www.premiumpsu.com
Born in Barcelona, Powering the World
Design, calculation and simulation of planar transformers
Application Notes, Energy, Sin categoría

Design, calculation and simulation of planar transformers

PREMIUM SA · ENGINEERING INSIGHT · HIGH-FREQUENCY MAGNETICS · 2026

Loss physics, winding structures, parasitics, insulation standards and the open-source software ecosystem for high-frequency magnetics.

Premium PSU

 

Executive summary

The drive for higher power density, efficiencies above 98 % and ultra-thin profiles has pushed the transition from the conventional wire-wound transformer to the planar transformer: photolithographically etched copper traces on multilayer PCB or foils, coupled to low-profile ferrite cores. The change is not just form factor; it redefines high-frequency electromagnetic losses, parasitic dynamics and the validation methodology.

This article systematizes advanced planar-transformer design: the loss physics (skin effect, proximity and the Dowell model), turns-number optimization, the interleaved winding structures that control the magnetomotive force, leakage-inductance and inter-winding-capacitance management, experimental and finite-element validation, insulation-standard compliance, and the software ecosystem —with particular attention to the open-source tools that enable first-class engineering without proprietary licences, consistent with Premium SA’s preference for open, auditable software.

All figures and tools are traced: to peer-reviewed technical literature (application notes, DTU/Ouyang papers, IPC/IEC standards) and to verified open-source repositories. The formulas are the classic ones of the domain.

≈ ⅓Planar profile (~10.7 mm) versus 30–40 mm conventional
> 98 %Efficiency of the 1 kW / 1 MHz LLC with full integration
< 1 %Hybrid analytical-FEA model error vs 3D transient
−75 %Leakage inductance reduction with simple interleaving

Planar versus conventional: what changes

Conventional round-wire, Litz or foil transformers on PQ/ETD bobbins have severe limitations above 100 kHz, and winding variability introduces parasitic spread that hampers industrial repeatability. The planar replaces coils with copper traces on multilayer PCB or foils coupled to low-profile EQ/ER/E-LP cores. The most visible consequence is geometric; the most valuable, repeatability.

Table 1 — Conventional versus optimized planar transformer (traced to literature).

Parameter Conventional (PQ32/35) Planar (EQ38/8/25) Engineering implication
Profile height 30–40 mm ≈ 10.7 mm (≈ ⅓) Integration into very low-profile boards (brick)
Weight High ≈ 3× lighter Critical in transport and aerospace
Parasitic repeatability Low (high spread) Very high (photolithography) Enables precise tuning of LLC tanks
HF conduction losses High (inefficient packing) Low if Rac is optimized Better dissipation and overall efficiency
Prototyping flexibility Very high (rewind by hand) Low (any change = new PCB) Forces simulation before fabrication

That last row sets the method: since any minor change requires a new PCB, planar design does not allow bench trial-and-error. It demands rigorous analytical modelling and simulation before going to production.

Systematic design methodology

The move to planar is not the geometric replica of a wire transformer: it requires a structured flow that audits the electrical, thermal and mechanical specifications and adapts them to PCB physics.

Table 2 — Planar design workflow (eight stages).

Stage Key action Critical parameter
1 · Base-design audit Collect V, P, f, Lm, Llk, insulation, temperatures Thermal and electrical targets to replicate/improve
2 · Core and material Planar geometry (EQ/ER/E-LP) and ferrite (N87/N95/3C95/3F3) Balance hysteresis loss vs available height
3 · Number of turns Np, Ns from Faraday’s law and ΔB max Fewer turns → less copper but more core
4 · Copper thickness Size h according to skin depth δ Avoid oversizing (aggravates proximity)
5 · Stack-up P/S/shield sequence and interleaving Determines Llk, Rac and global losses
6 · Trace width Carry the DC and AC current density Keep ΔT within safety limits
7 · Electrical/thermal validation FEA or advanced analytics of HF losses and T Spot hotspots before fabrication
8 · PCB fabrication Vias, insulation slots, export Gerber Manufacturability and insulation compliance

Loss physics: skin, proximity and Dowell

Accurate conduction-loss calculation is the greatest challenge in HF magnetics. Two coupled phenomena govern it. The skin effect concentrates current in a surface layer of depth δ = √(ρ/(π·μ·f)); for copper at 70 °C it reduces to the practical rule δ ≈ 2.276/√f mm. The resistance increase from this effect is Rac/Rdc = ξ·[sinh(2ξ)+sin(2ξ)]/[cosh(2ξ)−cos(2ξ)], with ξ = h/δ the normalized thickness: when ξ > 2, the conductor centre barely conducts and thickening the copper stops helping.

The proximity effect is more damaging. When layers are stacked, the fields of neighbouring conductors induce cross eddy currents. Dowell’s model for the m-th layer adds a second term scaling with (m²−1), where m is the layer’s MMF factor. Because that term grows quadratically with layer position, losses in stacks with many continuous non-interleaved layers explode. And since real currents are PWM, not sinusoidal, the resistance must be evaluated over the harmonic spectrum —P_AC = Σ Rac(n·fs)·I²rms(n)—: high-order harmonics, with very small δ, dissipate a lot even at moderate amplitude.

The optimal number of turns. Increasing N lowers the flux density ΔB and, via Steinmetz (Pv = K·f^α·ΔB^β, with β≈2–3), reduces core losses; but it demands narrower traces or more layers, raising Rdc and, through Dowell’s m, Rac. The optimum is not to eliminate one term but to balance them: the absolute loss minimum occurs when the copper losses are held at a factor β_loss = P_copper/P_core of the ferrite losses. It is the designer’s analytical tuning criterion.

Winding structures: interleaving as the lever

The way to tame proximity losses is to alter the spatial field distribution in the core window, abandoning simple non-interleaved stacks. Interleaving alternates primary and secondary layers with opposite current directions in adjacent layers, cancelling the net field and reducing Dowell’s m. The figure below compares three stack-ups and their MMF profile.

calculation
Figure 1 — Winding stack-up and MMF profile. Interleaving lowers the per-layer peak MMF and, with it, proximity losses and leakage.

The advanced symmetric structure 0.5P-S-P-S-P-S-P-S-0.5P —with the outer layers at half-turn and connected in parallel— forces multiple MMF zero-crossings, keeping m≈0.5–1 uniformly and minimizing both Rac/Rdc and the stored leakage energy. For fractional ratios or extreme thermal performance in the MHz range, the half-turn structure implements 180° traces in parallel on the outer layers, splitting the current and halving the peak field. And at high current, the interleaved serpentine winding snakes across several legs, maximizing window use without extra interconnection layers.

Table 3 — Winding structures and their behaviour (traced to literature).

Structure MMF profile Rac/Rdc Leakage Llk Routing / vias
Non-interleaved (P-P-P-P-S-S-S-S) Linear ramp; peak at interface Very high (accumulates m) Very high Minimal (no crossings)
Simple interleaving (P-S-P-S…) Sawtooth; moderate peaks Low (m≈1) Reduced up to −75 % High (alternating layers)
Advanced symmetric (0.5P-S…0.5P) Attenuated; cancellation at outer faces Absolute minimum (series-parallel) Very low and controlled Very high (parallel vias, symmetry)
Half-turn Shifted and symmetric to axis Very low (m≈0.5) Minimal for a given insulation Very high (fractional geometry)

Parasitics as design variables: leakage, capacitance and EMI

The planar’s tight spatial coupling maximizes mutual inductance but demands treating parasitics as active variables. Leakage inductance Llk arises from flux that closes through the window without linking both windings. In hard switching (full bridge, flyback) it is a harmful parasitic that causes overvoltages and demands snubbers; it is minimized with full interleaving and thin dielectrics. But in LLC resonant converters it is exploited: a controlled Llk is deliberately designed to act as the series resonant inductor Lr, removing a discrete component and gaining density. To tune it, magnetic shunts are inserted or the inter-layer dielectric spacing (Δh) is adjusted, which raises Llk linearly.

The high-frequency design dilemma. Reducing leakage forces primary and secondary close together, which raises the inter-winding capacitance C_inter. Under the primary’s fast dv/dt, C_inter injects common-mode displacement currents into the secondary, generating conducted EMI that demands bulky filters. It is broken with electrostatic shielding (a thin, slotted copper layer —to avoid shorting the flux— tied to a quiet ground) or with an auxiliary cancellation winding of opposite polarity (−dv/dt) that nulls the net common-mode current.

Validation: leakage measurement and hybrid analytical-FEA calibration

In a high-performance planar, Llk is under 1 % of the magnetizing inductance (often 0.1–0.2 %, in nanohenries), of the same order as the instrument leads’ own inductance. It is measured with the direct short-circuit method (a wide copper bar across the secondary + impedance analyzer at the decade of the switching frequency) or, without an HF analyzer, with the turns-ratio and AC-deviation method. In both cases it pays to build test fixtures with planar contacts and symmetrical coaxial traces to calibrate open/short at the device plane.

The one-dimensional Dowell model fails on real traces: concentric spirals concentrate the DC current at the inner radius (spirality effect), raising the real Rdc. The hybrid analytical-numerical methodology solves this without the cost of a full 3D transient: the ideal arc is computed (Rca = 2π/(σ·h_cu·ln(r₂/r₁))), the real resistance is extracted by static DC FEA with quarter symmetry, a calibration factor (Rca/R₊) is obtained and injected as a coefficient into the AC-loss formula. The result agrees with 3D transient simulations (Ansys Maxwell) within under 1 % error, in microseconds instead of hours.

Insulation and standards: clearance, creepage and IEC 60664-1

The proximity of high- and low-voltage traces demands strict compliance with dielectric standards. Clearance is the through-air distance (prevents direct arcing); creepage, the leakage path along the solid surface (prevents conductive carbonization). IPC-2221 sets minimums up to 500 V and adds a linear surcharge above that; IPC-9592, specific to power conversion, imposes more conservative criteria. High-CTI materials tolerate smaller creepages.

Distances are not read from a static table: IEC 60664-1 requires evaluating the real environment. The pollution degree (PD2 common in industry) can be reclassified to PD1 with conformal coating or potting, drastically reducing the required creepage. The overvoltage category (OVC) sets the primary clearance on mains. And altitude penalizes: above 2000 m the lower dielectric strength of air forces multiplying the clearance, with a factor of about 1.48 at 5000 m —relevant in mountain railway, high-altitude solar and avionics. Physically, creepage is multiplied by milling through slots in the FR4 between primary and secondary, forcing the leakage path to go around the cut, or by interposing insulating barriers.

Software ecosystem: open and commercial

The coupled complexity of the HF field has produced a mature software ecosystem. Premium SA prioritizes, where they meet requirements, open-source and auditable tools: they enable first-class engineering with no lock-in or licence cost, and their verifiable code fits the traceability that regulated sectors demand.

On the open side, the OpenMagnetics project stands out —a working group of the PSMA magnetics committee—: its MKF compute engine (C++) is exposed in Python via PyOpenMagnetics/PyMKF and operates on the neutral MAS format (Magnetic Agnostic Structure, a JSON schema describing requirements, construction and results, with insulation coordination per IEC 62368-1/61558). python-planar-magnetics (on PyPI) generates planar spirals respecting DRC rules, estimates Rdc correcting for spirality, and exports to KiCad (S-expressions) and DXF. For full FEA, ONELAB integrates Gmsh (meshing), GetDP (eddy-current fields coupled to SPICE) and Elmer (3D multiphysics in parallel, couplable to OpenFOAM for conjugate thermal). The Ansyas bridge (Synopsys–Würth collaboration) connects MAS to Ansys Maxwell via PyAEDT.

Table 4 — Software for planar magnetics design (verified).

Suite Licence Base / environment Capability for planars
PyOpenMagnetics / MAS Open source (MIT) Python wrapper · C++ MKF engine Proximity/skin losses, MAS JSON schema, SVG plotting
python-planar-magnetics Open source Parametric Python scripting DRC spirals, Rdc correction, KiCad/DXF export
ONELAB (GetDP/Gmsh/Elmer) Open source (GPL) General-purpose FEA + SPICE Coupled 2D/3D eddy current and conjugate thermal (OpenFOAM)
Ansys Maxwell Commercial Reference 3D EM FEA Nonlinear hysteresis, bidirectional thermal-mechanical coupling
COMSOL / CST Commercial Multiphysics FEA / FEM-FIT-TLM Coupled multiphysics; fine EMC validation
PI Expert (Planar Builder) Commercial (Power Integrations) Automated cloud synthesis Stack-up, core, widths, clearance/creepage and Gerbers

Synthesis — Premium SA engineering recommendations

  • Tuned copper thickness: keep h ≤ 2δ at the working frequency; in the MHz range, thin foils or 1–2 oz copper interleaved, never generic heavy copper.
  • Always interleave the stack: avoid continuous MMF ramps; prioritize symmetric structures (0.5P-S…0.5P) or half-turn to minimize proximity and leakage.
  • Parasitics by topology: in LLC, design Llk as the resonant inductor (removes the discrete part); in hard switching, minimize Llk and break C_inter with electrostatic shielding to a quiet ground.
  • Hybrid analytical-FEA flow: calibrate the Rac equations with a geometric factor extracted from static DC FEA; enables Pareto optimization with <1 % error versus the 3D transient.
  • Insulation by real environment: size clearance/creepage with IEC 60664-1 (PD, OVC, altitude); mill slots in the FR4 and evaluate conformal coating to reclassify PD2→PD1.
  • Open software first: OpenMagnetics/MAS and python-planar-magnetics for synthesis and losses; ONELAB/Elmer for FEA; reserve commercial suites for final multiphysics validation.

Sources and traceability

Premium SA internal catalogue: block B8 (passive/magnetic components), B7 (thermal management), B4 (resonant topologies). Companion to the Premium article «Three-phase resonant converters and planar magnetic integration» (that one, system-level integration; this one, planar-transformer design methodology).

External technical literature and tools (selection):

  • Losses and design: Dowell model; loss and leakage optimization in planars (DTU / Ouyang); Texas Instruments application notes (Topic 4, Designing Planar Magnetics).
  • Case studies: 1 kW / 1 MHz one-eighth-brick LLC (TI SSZTD94); 1 W ultra-flat isolated supply TIDA-00688 (TI TIDUB83).
  • Insulation: IPC-2221 / IPC-9592; IEC 60664-1 (insulation coordination; altitude factor ≈1.48 at 5000 m); IEC 62368-1.
  • Open software (verified): OpenMagnetics / MAS / PyMKF (PSMA Magnetics Committee WG; IEEE-PELS, 40+ models); python-planar-magnetics (PyPI, dzimmanck); ONELAB / GetDP / Gmsh / Elmer; Ansyas bridge (Synopsys–Würth).

 

About Premium SA

Premium SA is a Barcelona-based manufacturer of electronic power converters for railway, industrial and energy applications. With more than 900 standard product designs and over 40 years of operational experience, Premium SA supplies DC/DC converters, DC/AC inverters, AC/AC frequency converters, battery chargers, rectifiers and UPS systems from 50 W to 72 kW.

The D2x / DFR methodology integrates magnetic design —including parasitic co-design and simulation verification— from the conceptual phase, with a preference for open-source, on-premises and auditable tools, and traceable experimental validation compliant with the standards of regulated sectors.

Premium PSU
Premium SA · Barcelona, Spain · info@premiumpsu.com · +34 932 232 685 · www.premiumpsu.com
Born in Barcelona, Powering the World
Industrial Power Converter Selection Guide: 5 Critical Parameters
Application Notes

Industrial Power Converter Selection Guide: 5 Critical Parameters

Technical Guide · Industrial Power Electronics · Barcelona, Spain

Industrial Power Converter Selection Guide: 5 Critical Parameters

The parameters most engineers overlook when specifying an industrial power converter — and why they determine whether a design succeeds or fails in the field. Insights from 900+ designs delivered from Barcelona.

Premium PSU — Industrial power converter manufacturer in Barcelona, Spain
|
April 2026
|
For automation engineers, maintenance managers and industrial machinery designers
900+
Designs delivered
50 W–72 kW
Power range
4–6 wks
Lead time Europe
15–25 yrs
Target service life

 

Selecting an industrial power converter seems straightforward: define input voltage, output voltage, power rating, and find a supplier. In practice, most field failures with industrial power converters are not caused by equipment defects — they result from incomplete or incorrect specifications. This guide distils the selection criteria that more than 900 designs, delivered from our manufacturing facility in Barcelona, Spain, have taught us make the real difference.

The Five Parameters Everyone Specifies

Input voltage, output voltage, nominal power, efficiency and operating temperature. These are the basic parameters listed in any industrial power supply datasheet — well documented and universally understood. We will not dwell on them here.

What matters are the parameters that are routinely omitted, yet determine whether the industrial DC/DC converter — or inverter — will operate reliably throughout the entire service life of the installation.

The Five Parameters Most Engineers Overlook

1. Actual Input Voltage Range

Most specifications state the nominal voltage. In a real industrial environment, however, mains voltage can fluctuate between +10% and −15% of nominal. Switching transients can add spikes of several hundred volts. Specify the full range the power converter must tolerate — transients included.

2. Load Inrush Current

A 5 kW motor can demand 15 kW during the first seconds of start-up. A converter sized only for nominal power will trip on overcurrent. Specify peak power and its duration.

3. Real Ambient Conditions

Not the laboratory conditions — the actual installation conditions. Peak summer temperature inside the electrical cabinet (easily 55–60 °C with poor ventilation). Altitude (air density decreases above 1,000 m, reducing cooling capacity). Humidity, dust, vibration. These factors are frequently underestimated in industrial installations across Southern Europe.

4. Electromagnetic Compatibility (EMC)

In industrial environments with variable-speed drives, welding equipment and large motors, electromagnetic interference levels are significant. An industrial inverter without adequate EMC filtering can cause malfunctions in nearby PLCs and sensors. In Europe, compliance with EMC Directive 2014/30/EU is mandatory for equipment in service.

5. Galvanic Isolation

In many applications, electrical separation between input and output is not a feature — it is a safety requirement. Specify the isolation voltage required (typically 1,500 Vdc or 3,000 Vdc for industrial applications). This is especially relevant in railway, energy and defence sectors.

Golden rule: A complete technical specification reduces field incidents by more than 70% during the first 12 months of operation. Time spent on correct parameter definition is always less than the cost of a field replacement for an industrial power converter.

Common Errors in Industrial Power Converter Selection

Error Description Real impact
Error 1 Sizing for nominal power without accounting for inrush peaks Overcurrent trips. Practical rule: size at least ×1.5 nominal power when motor loads are present.
Error 2 Ignoring thermal derating A 10 kW converter rated at 25 °C ambient may deliver only 7 kW at 55 °C. Always consult the manufacturer’s derating curve and calculate for your actual operating temperature.
Error 3 Selecting on unit price The cost of a field failure (production downtime, technician dispatch, spare parts, lost revenue) is typically 5 to 20 times the equipment price.
Error 4 Not verifying long-term product availability Industrial equipment is installed for 15–25 years. A product discontinued after 5 years can trigger a redesign costing over €30,000 per affected model.

Standard vs. Custom Industrial Power Converter: When to Choose Each

Standard converters cover the majority of common industrial applications and offer the best cost-to-lead-time ratio. There are, however, situations where a custom industrial power converter is the right choice:

  • When physical space is critical (standard enclosure does not fit the cabinet or machine).
  • When multiple outputs at different voltages are required from a single input.
  • When environmental conditions are extreme (temperature, vibration, corrosive atmosphere).
  • When volume justifies an optimised design (typically from 50–100 units per year).
Premium SA approach — Configurable platforms: a proven, certified base design with adjustable parameters (input voltage, output configuration, mechanical enclosure, environmental protection). Manufactured in Barcelona, Spain. This delivers 80% of the benefits of a fully custom design at 20% of the engineering cost — with competitive lead times across Spain and Europe.

Industrial Sectors We Serve in Spain and Europe

From our manufacturing plant in Barcelona, Spain, we supply industrial power converters to sectors including industrial automation, defence, telecommunications, renewable energy, electrical grid infrastructure and railway. Utilities, railway signalling integrators and multiple industrial OEMs across Spain and Europe rely on our equipment for their most demanding applications.

The advantage of working with a specialised European power converter manufacturer is clear: 4–6 week lead times in Spain and Europe, direct technical support from the engineering team that designed the product, and the flexibility to adapt solutions without the lead times or costs of large multinational groups.

Do you need an industrial power converter for your application?

Describe your project and our engineering team in Barcelona will recommend the optimal solution. We manufacture industrial power converters from 50 W to 72 kW. Delivery in 4–6 weeks across Spain and Europe.

Contact our technical team in Barcelona →

You may also be interested in:

  • Industrial DC/DC converters
  • DC/AC inverters for industrial applications
  • Industrial battery chargers
  • Frequency converters for export manufacturing

 

Premium PSU — Industrial power converter manufacturer in Barcelona, Spain
Born in Barcelona, Powering the World · premiumpsu.com
Page 2 of 512345

Categories

  • Application Notes
  • Behind Premium PSU
  • Case Studies by industry
  • Case Studies by product
  • Custom solutions
  • Data Center
  • DC/AC inverters
  • DC/DC converters
  • Defense
  • Energy
  • Events and corporate news
  • High Tech
  • Railway & Transportation
  • Sin categoría
  • UPS
  • Whitepapers

Categoria

Premium

At Premium PSU, we are specialists in designing and manufacturing power conversion systems for the industrial market. Our product range includes high reliability power supplies from 50W to 72kW.

PREMIUM PSU
C/ Dolors Aleu, 19-21, 2nd Floor
08908 – Hospitalet de Llobregat
Barcelona-SPAIN
t.+34 93 223 26 85

Born in Barcelona Powering the World

© Copyright 2026 - Premium PSU | Power supplies equipment and systems
  • Legal Note
  • Cookie Policy
  • Complaints
  • Sales General Terms
Scroll to top Scroll to top Scroll to top
Manage Cookie Consent
We use technologies like cookies to store and/or access device information. We do this to improve browsing experience and to show (non-) personalized ads. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
  • Manage options
  • Manage services
  • Manage {vendor_count} vendors
  • Read more about these purposes
Preferences
  • {title}
  • {title}
  • {title}