Batteries 12 · 24 · 48 · 72-110 V · 250-1000 VShock & vibration EN 61373-40 °C … +85 °Cup to IP68 / IP69KCustom designs · Barcelona
Industrial Robot Cells, Cobots & Automation
Articulated welding, handling and palletising robots, SCARA and delta pick-and-place, cobots for assembly and machine tending, robotic test and end-of-line cells
🤖Standard and Custom products:Standard products are industrial or railway grade (EN 50155, EN 61373 shock and vibration, EN 45545-2) and are used on board the robot or in its charging and control infrastructure; products marked CUSTOM were designed by Premium for specific customers. The datasheets do not state functional-safety ratings (ISO 13849 / IEC 61508), IEC 60601 (medical) or ATEX / IECEx: the power products feed the safety and control circuits of the robot, and for medical, hazardous-area or classed-vessel robots the requirement is studied as a custom project.
💡 Hover a numbered point or an application below for a quick preview · tap or click for the full product list
AC: factory mains 400/480 V · 230 V · AC outputsBattery / low-voltage DC: 12 · 24 · 48 · 72-110 VHigh-voltage DC (250-1000 V)⧉ ParallelCUSTOMTags on each equipment box show the supply it runs from, which is what decides the product.
Search by product or part number
Type a product family, a part number or a type of converter: the product, its variant and the applications where it is installed appear at once. Custom designs have no public part number: search them by name.
🔎
Find my product
Enter your supply, the output you need and the power: the tool proposes Premium products and how many units in parallel.
→
Fill in only what you know: products appear as soon as you enter one value (input, output or power). Leave the type on Any to search every converter type.
Examples:
Battery autonomy calculator
Enter the load, the battery voltage and the autonomy: the tool sizes the battery and the charger and proposes the Premium chargers and DC UPS that fit.
Calculation factors (typical values, editable)
Usable capacity: share of the rated capacity you allow to discharge (typical 80 % lead-acid and NiCd, 90 % LiFePO4).
Ageing factor: 1.25 keeps the autonomy when the battery has dropped to 80 % of its capacity at end of life.
Temperature factor: 1.00 for a battery at 20-25 °C; use the battery manufacturer's correction for a colder minimum temperature (cold stores, outdoor robots).
Efficiency battery → load: 100 % if the load is on the battery bus; use the datasheet efficiency of the DC/DC or inverter in between.
Recharge factor: charge returned per Ah discharged (typical 1.1 lead-acid, 1.4 NiCd, 1.05 LiFePO4).
Charge voltage per cell: used for the charger power (typical 2.30 V lead-acid, 1.45 V NiCd, 3.50 V LiFePO4).
ⓘTypical sizing values are filled in by default; change any of them to your own. The capacity is referred to the discharge time of the autonomy: batteries rated at a longer discharge time (e.g. C10) deliver less capacity for short autonomies, so check the battery manufacturer's discharge tables. Confirm the final sizing with Premium and the battery manufacturer.
Robotics standards guide
Products are listed only when the standard appears on their datasheet. Robot and machinery safety standards apply to the robot and its integrator; the power products are selected by input, output, EMC, safety and environmental data. Premium supports custom projects where a specific standard is required.
All product families in this app
…
Category
Certification
Brand · feature
Product × application matrix
-
▦Every product of the map against every application. The numbers are the zones of each application where the product fits electrically: click a number to open that zone in its map, or a product name for its full spec sheet.
Category
Custom designs by Premium
-
🛠Designs already developed by Premium for specific projects, shown without part number or customer. They are offered as they are or as the starting point for your requirement; when a catalogue product covers the need, the catalogue product is shown in the map instead.
—
Manage Cookie Consent
We use technologies like cookies to store and/or access device information. We do this to improve browsing experience and to show (non-) personalized ads. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.