Premium
At Premium PSU, we design solutions that bring new performance to each of our devices. The UPS series EPS-200 are 48V rectifiers / battery chargers that manage the charging of lead batteries with capacities ranging from 10Ah to 20Ah. It offers 200W on a continuous basis and 400W for 10 seconds every minute and its input voltage is 230Vac. This series has been designed for applications for 4.0 Industry, IoT and smart grids.
The EPS-200 is an uninterruptible power supply system, and its mission is to maintain power to the loads at all times. This series includes WEB services, which can be accessed via an RJ45/Ethernet port.
Looking for an EPS-200 with different technical features? Tell us your challenge and we’ll make it ours from now on!
3 years
| EPS-200 | OUT-1 | TOTAL POWER | PEAK POWER | BATTERY | INPUT ISOLATION | HOUSING |
|---|---|---|---|---|---|---|
| EPS-200-5193 | 48V / 5.2A10.3Apk | 200W | 400W | 48V | 10000 Vrms | Plastic case |
The EPS-200 series is a 48V rectifier/battery charger. The battery is charged using the UI method, i.e. at a constant voltage and with a limited current. When the battery is fully charged, these chargers keep the battery floating, supplying the small maintenance current that is required by the battery. When the battery has totally or partially discharged after a mains failure, the chargers modify the battery/output voltage to replenish the discharged energy in the shortest possible time.
Unlike other equipment, this device incorporates a battery status check system which measures the useful capacity of the battery.
At the same time, it incorporates a high precision temperature sensor that allows for the optimal battery charge, based on its temperature.
Designing robust products, suitable to respond to market demands, is key for Premium. But we also make sure to enable adjustments. Tell us your challenge and we’ll make it ours from now on!
Premium
Premium150W (275Wpf) 3 outputs UPS Ethernet uninterruptible power supply battery c...
Premium
